lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 047/165] net/wan/fsl_ucc_hdlc: reject muram offsets above 64K
Date
From: Rasmus Villemoes <linux@rasmusvillemoes.dk>

[ Upstream commit 148587a59f6b85831695e0497d9dd1af5f0495af ]

Qiang Zhao points out that these offsets get written to 16-bit
registers, and there are some QE platforms with more than 64K
muram. So it is possible that qe_muram_alloc() gives us an allocation
that can't actually be used by the hardware, so detect and reject
that.

Reported-by: Qiang Zhao <qiang.zhao@nxp.com>
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wan/fsl_ucc_hdlc.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index af85a1b3135e2..87bf05a81db50 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -209,6 +209,11 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
ret = -ENOMEM;
goto free_riptr;
}
+ if (riptr != (u16)riptr || tiptr != (u16)tiptr) {
+ dev_err(priv->dev, "MURAM allocation out of addressable range\n");
+ ret = -ENOMEM;
+ goto free_tiptr;
+ }

/* Set RIPTR, TIPTR */
iowrite16be(riptr, &priv->ucc_pram->riptr);
--
2.20.1


\
 
 \ /
  Last update: 2020-02-27 15:44    [W:0.412 / U:1.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site