lkml.org 
[lkml]   [2020]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v15 3/5] PCI/EDR: Export AER, DPC and error recovery functions
From
Date
Hi Bjorn,

On 2/25/20 5:02 PM, Bjorn Helgaas wrote:
> On Thu, Feb 13, 2020 at 10:20:15AM -0800, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
>> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>>
>> This is a preparatory patch for adding EDR support.
>>
>> As per the Downstream Port Containment Related Enhancements ECN to the
>> PCI Firmware Specification r3.2, sec 4.5.1, table 4-6, If DPC is
>> controlled by firmware, firmware is responsible for initializing
>> Downstream Port Containment Extended Capability Structures per firmware
>> policy. Further, the OS is permitted to read or write DPC Control and
>> Status registers of a port while processing an Error Disconnect Recover
>> notification from firmware on that port. Error Disconnect Recover
>> notification processing begins with the Error Disconnect Recover notify
>> from Firmware, and ends when the OS releases DPC by clearing the DPC
>> Trigger Status bit.Firmware can read DPC Trigger Status bit to determine
>> the ownership of DPC Control and Status registers. Firmware is not
>> permitted to write to DPC Control and Status registers if DPC Trigger
>> Status is set i.e. the link is in DPC state. Outside of the Error
>> Disconnect Recover notification processing window, the OS is not
>> permitted to modify DPC Control or Status registers; only firmware
>> is allowed to.
>>
>> To add EDR support we need to re-use some of the existing DPC,
>> AER and pCIE error recovery functions. So add necessary interfaces.
>>
>> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
>> ---
>> drivers/pci/pci.h | 8 ++++
>> drivers/pci/pcie/aer.c | 39 ++++++++++++++------
>> drivers/pci/pcie/dpc.c | 84 +++++++++++++++++++++++++-----------------
>> drivers/pci/pcie/dpc.h | 20 ++++++++++
>> drivers/pci/pcie/err.c | 30 ++++++++++++---
>> 5 files changed, 131 insertions(+), 50 deletions(-)
>> create mode 100644 drivers/pci/pcie/dpc.h
>>
>> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
>> index 6394e7746fb5..136f27cf3871 100644
>> --- a/drivers/pci/pci.h
>> +++ b/drivers/pci/pci.h
>> @@ -443,6 +443,9 @@ struct aer_err_info {
>>
>> int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info);
>> void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
>> +int pci_aer_clear_err_uncor_status(struct pci_dev *dev);
>> +void pci_aer_clear_err_fatal_status(struct pci_dev *dev);
>> +int pci_aer_clear_err_status_regs(struct pci_dev *dev);
>> #endif /* CONFIG_PCIEAER */
>>
>> #ifdef CONFIG_PCIE_DPC
>> @@ -549,6 +552,11 @@ static inline int pci_dev_specific_disable_acs_redir(struct pci_dev *dev)
>> /* PCI error reporting and recovery */
>> void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
>> u32 service);
>> +pci_ers_result_t pcie_do_recovery_common(struct pci_dev *dev,
>> + enum pci_channel_state state,
>> + u32 service,
>> + pci_ers_result_t (*reset_cb)(void *cb_data),
>> + void *cb_data);
>>
>> bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
>> #ifdef CONFIG_PCIEASPM
>> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
>> index 4a818b07a1af..399836aa07f4 100644
>> --- a/drivers/pci/pcie/aer.c
>> +++ b/drivers/pci/pcie/aer.c
>> @@ -376,7 +376,7 @@ void pci_aer_clear_device_status(struct pci_dev *dev)
>> pcie_capability_write_word(dev, PCI_EXP_DEVSTA, sta);
>> }
>>
>> -int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
>> +int pci_aer_clear_err_uncor_status(struct pci_dev *dev)
>> {
>> int pos;
>> u32 status, sev;
>> @@ -385,9 +385,6 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
>> if (!pos)
>> return -EIO;
>>
>> - if (pcie_aer_get_firmware_first(dev))
>> - return -EIO;
>> -
>> /* Clear status bits for ERR_NONFATAL errors only */
>> pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
>> pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev);
>> @@ -397,9 +394,17 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
>>
>> return 0;
>> }
>> +
>> +int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
>> +{
>> + if (pcie_aer_get_firmware_first(dev))
>> + return -EIO;
>> +
>> + return pci_aer_clear_err_uncor_status(dev);
>> +}
>> EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status);
>>
>> -void pci_aer_clear_fatal_status(struct pci_dev *dev)
>> +void pci_aer_clear_err_fatal_status(struct pci_dev *dev)
>> {
>> int pos;
>> u32 status, sev;
>> @@ -408,9 +413,6 @@ void pci_aer_clear_fatal_status(struct pci_dev *dev)
>> if (!pos)
>> return;
>>
>> - if (pcie_aer_get_firmware_first(dev))
>> - return;
>> -
>> /* Clear status bits for ERR_FATAL errors only */
>> pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
>> pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev);
>> @@ -419,7 +421,15 @@ void pci_aer_clear_fatal_status(struct pci_dev *dev)
>> pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
>> }
>>
>> -int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
>> +void pci_aer_clear_fatal_status(struct pci_dev *dev)
>> +{
>> + if (pcie_aer_get_firmware_first(dev))
>> + return;
>> +
>> + return pci_aer_clear_err_fatal_status(dev);
>> +}
>> +
>> +int pci_aer_clear_err_status_regs(struct pci_dev *dev)
>> {
>> int pos;
>> u32 status;
>> @@ -432,9 +442,6 @@ int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
>> if (!pos)
>> return -EIO;
>>
>> - if (pcie_aer_get_firmware_first(dev))
>> - return -EIO;
>> -
>> port_type = pci_pcie_type(dev);
>> if (port_type == PCI_EXP_TYPE_ROOT_PORT) {
>> pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status);
>> @@ -450,6 +457,14 @@ int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
>> return 0;
>> }
>>
>> +int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
>> +{
>> + if (pcie_aer_get_firmware_first(dev))
>> + return -EIO;
>> +
>> + return pci_aer_clear_err_status_regs(dev);
>> +}
> We started with these:
>
> pci_cleanup_aer_uncorrect_error_status()
> pci_aer_clear_fatal_status()
> pci_cleanup_aer_error_status_regs()
>
> This was already a mess. They do basically similar things, but the
> function names are a complete jumble. Let's start with preliminary
> patches to name them consistently, e.g.,
>
> pci_aer_clear_nonfatal_status()
> pci_aer_clear_fatal_status()
> pci_aer_clear_status()
>
> Now, for EDR you eventually add this in edr_handle_event():
>
> edr_handle_event()
> {
> ...
> pci_aer_clear_err_uncor_status(pdev);
> pci_aer_clear_err_fatal_status(pdev);
> pci_aer_clear_err_status_regs(pdev);
>
> I see that this path needs to clear the status even in the
> firmware-first case, so you do need some change for that. But
> pci_aer_clear_err_status_regs() does exactly the same thing as
> pci_aer_clear_err_uncor_status() and pci_aer_clear_err_fatal_status()
> plus a little more (clearing PCI_ERR_ROOT_STATUS), so it should be
> sufficient to just call pci_aer_clear_err_status_regs().
>
> So I don't think you need to make wrappers for
> pci_aer_clear_nonfatal_status() and pci_aer_clear_fatal_status() at
> all since they're not needed by the EDR path.
>
> You *do* need a wrapper for pci_aer_clear_status(), but instead of
> just adding random words ("err", "regs") to the name, please name it
> something like pci_aer_raw_clear_status() as a hint that it skips
> some sort of check.
>
> I would split this into a separate patch. This patch contains a bunch
> of things that aren't really related except that they're needed for
> EDR. I think it will be more readable if each patch just does one
> piece of it.
Ok. I will split it into multiple patches. I just grouped them together
as a preparatory patch for adding EDR support.
>
>> void pci_save_aer_state(struct pci_dev *dev)
>> {
>> struct pci_cap_saved_state *save_state;
>> diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
>> index 99fca8400956..acae12dbf9ff 100644
>> --- a/drivers/pci/pcie/dpc.c
>> +++ b/drivers/pci/pcie/dpc.c
>> @@ -15,15 +15,9 @@
>> #include <linux/pci.h>
>>
>> #include "portdrv.h"
>> +#include "dpc.h"
>> #include "../pci.h"
>>
>> -struct dpc_dev {
>> - struct pci_dev *pdev;
>> - u16 cap_pos;
>> - bool rp_extensions;
>> - u8 rp_log_size;
>> -};
> Adding dpc.h shouldn't be in this patch because there's no need for a
> separate dpc.h file yet -- it's only included this one place. I'm not
> positive a dpc.h is needed at all -- see comments on patch [4/5].
Yes, if we use pdev in dpc functions used by EDR code, we should
not need it.
>
>> static const char * const rp_pio_error_string[] = {
>> "Configuration Request received UR Completion", /* Bit Position 0 */
>> "Configuration Request received CA Completion", /* Bit Position 1 */
>> @@ -117,36 +111,44 @@ static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
>> return 0;
>> }
>>
>> -static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
>> +pci_ers_result_t dpc_reset_link_common(struct dpc_dev *dpc)
>> {
> I don't see why you need to split this into dpc_reset_link_common()
> and dpc_reset_link(). IIUC, you split it so the DPC driver path can
> supply a pci_dev * via
>
> dpc_handler
> pcie_do_recovery
> pcie_do_recovery_common(..., NULL, NULL)
> reset_link(..., NULL, NULL)
> driver->reset_link(pdev)
> dpc_reset_link(pdev)
> dpc = to_dpc_dev(pdev)
I have split it mainly because of dpc_dev dependency. If we use
dpc_reset_link(pdev) directly it will try to find related dpc_dev using
to_dpc_dev() function. But this will not work in FF mode where DPC
is handled by firmware and hence we will not have DPC pcie_port
service driver enumerated for this device.
> dpc_reset_link_common(dpc)
>
> while the EDR path can supply a dpc_dev * via
>
> edr_handle_event
> pcie_do_recovery_common(..., edr_dpc_reset_link, dpc)
> reset_link(..., edr_dpc_reset_link, dpc)
> edr_dpc_reset_link(dpc)
> dpc_reset_link_common(dpc)
>
> But it looks like you *could* make these paths look like:
>
> dpc_handler
> pcie_do_recovery
> pcie_do_recovery_common(..., NULL, NULL)
> reset_link(..., NULL, NULL)
> driver->reset_link(pdev)
> dpc_reset_link(pdev)
>
> edr_handle_event
> pcie_do_recovery_common(..., dpc_reset_link, pdev)
> reset_link(..., dpc_reset_link, pdev)
> dpc_reset_link(pdev)
>
> and you wouldn't need edr_dpc_reset_link() at all and you wouldn't
> have to split dpc_reset_link_common() out.
>
>> - struct dpc_dev *dpc;
>> u16 cap;
>>
>> - /*
>> - * DPC disables the Link automatically in hardware, so it has
>> - * already been reset by the time we get here.
>> - */
>> - dpc = to_dpc_dev(pdev);
>> cap = dpc->cap_pos;
>>
>> /*
>> * Wait until the Link is inactive, then clear DPC Trigger Status
>> * to allow the Port to leave DPC.
>> */
>> - pcie_wait_for_link(pdev, false);
>> + pcie_wait_for_link(dpc->pdev, false);
> I'm hoping you don't need to split this out at all, but if you do,
> adding
>
> struct pci_dev *pdev = dpc->pdev;
>
> at the top will avoid these needless diffs.
>
>> if (dpc->rp_extensions && dpc_wait_rp_inactive(dpc))
>> return PCI_ERS_RESULT_DISCONNECT;
>>
>> - pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
>> + pci_write_config_word(dpc->pdev, cap + PCI_EXP_DPC_STATUS,
>> PCI_EXP_DPC_STATUS_TRIGGER);
>>
>> - if (!pcie_wait_for_link(pdev, true))
>> + if (!pcie_wait_for_link(dpc->pdev, true))
>> return PCI_ERS_RESULT_DISCONNECT;
>>
>> return PCI_ERS_RESULT_RECOVERED;
>> }
>>
>> +static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
>> +{
>> + struct dpc_dev *dpc;
>> +
>> + /*
>> + * DPC disables the Link automatically in hardware, so it has
>> + * already been reset by the time we get here.
>> + */
>> + dpc = to_dpc_dev(pdev);
>> +
>> + return dpc_reset_link_common(dpc);
>> +
>> +}
>> +
>> static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
>> {
>> struct pci_dev *pdev = dpc->pdev;
>> @@ -224,10 +226,9 @@ static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev,
>> return 1;
>> }
>>
>> -static irqreturn_t dpc_handler(int irq, void *context)
>> +void dpc_process_error(struct dpc_dev *dpc)
>> {
>> struct aer_err_info info;
>> - struct dpc_dev *dpc = context;
>> struct pci_dev *pdev = dpc->pdev;
>> u16 cap = dpc->cap_pos, status, source, reason, ext_reason;
>>
>> @@ -257,6 +258,14 @@ static irqreturn_t dpc_handler(int irq, void *context)
>> pci_cleanup_aer_uncorrect_error_status(pdev);
>> pci_aer_clear_fatal_status(pdev);
>> }
>> +}
>> +
>> +static irqreturn_t dpc_handler(int irq, void *context)
>> +{
>> + struct dpc_dev *dpc = context;
>> + struct pci_dev *pdev = dpc->pdev;
>> +
>> + dpc_process_error(dpc);
>>
>> /* We configure DPC so it only triggers on ERR_FATAL */
>> pcie_do_recovery(pdev, pci_channel_io_frozen, PCIE_PORT_SERVICE_DPC);
>> @@ -282,6 +291,25 @@ static irqreturn_t dpc_irq(int irq, void *context)
>> return IRQ_HANDLED;
>> }
>>
>> +void dpc_dev_init(struct pci_dev *pdev, struct dpc_dev *dpc)
>> +{
> Can you include the kzalloc() here so we don't have to do the alloc in
> pci_acpi_add_edr_notifier()?
Currently dpc driver allocates dpc_dev structure using pcie_port->device
reference in its devm_alloc* calls. But if we allocate dpc_dev inside
this function we should use pci_dev->dev reference for it. Is it OK to us
pci_dev->dev reference for DPC driver allocations ?
>
> I think there's also a leak there: pci_acpi_add_edr_notifier()
> kzallocs a struct dpc_dev, but I don't see a corresponding kfree().
since we are using devm_allocs, It should be freed when removing
the PCI device right?
>
>> + dpc->cap_pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_DPC);
> I think we need to check cap_pos for non-zero here. It's arguably
> safe today because portdrv only calls dpc_probe() when
> PCIE_PORT_SERVICE_DPC is set and we only set that if there's a DPC
> capability. But that's a long ways away from here and it's
> convoluted, so it's pretty hard to verify that it's safe.
ok. makes sense.
>
> When we add EDR into the picture and call this from
> pci_acpi_add_edr_notifier() and edr_handle_event(), I'm pretty sure
> it's not safe at all because we have no idea whether the device has a
> DPC capability.
>
> Factoring out dpc_dev_init() and the kzalloc() would be a simple
> cleanup-type patch all by itself, so it could be separated out for
> ease of reviewing.
>
>> + dpc->pdev = pdev;
>> + pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &dpc->cap);
>> + pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &dpc->ctl);
>> +
>> + dpc->rp_extensions = (dpc->cap & PCI_EXP_DPC_CAP_RP_EXT);
>> + if (dpc->rp_extensions) {
>> + dpc->rp_log_size =
>> + (dpc->cap & PCI_EXP_DPC_RP_PIO_LOG_SIZE) >> 8;
>> + if (dpc->rp_log_size < 4 || dpc->rp_log_size > 9) {
>> + pci_err(pdev, "RP PIO log size %u is invalid\n",
>> + dpc->rp_log_size);
>> + dpc->rp_log_size = 0;
>> + }
>> + }
>> +}
>> +
>> #define FLAG(x, y) (((x) & (y)) ? '+' : '-')
>> static int dpc_probe(struct pcie_device *dev)
>> {
>> @@ -298,8 +326,8 @@ static int dpc_probe(struct pcie_device *dev)
>> if (!dpc)
>> return -ENOMEM;
>>
>> - dpc->cap_pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_DPC);
>> - dpc->pdev = pdev;
>> + dpc_dev_init(pdev, dpc);
>> +
>> set_service_data(dev, dpc);
>>
>> status = devm_request_threaded_irq(device, dev->irq, dpc_irq,
>> @@ -311,18 +339,8 @@ static int dpc_probe(struct pcie_device *dev)
>> return status;
>> }
>>
>> - pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &cap);
>> - pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl);
>> -
>> - dpc->rp_extensions = (cap & PCI_EXP_DPC_CAP_RP_EXT);
>> - if (dpc->rp_extensions) {
>> - dpc->rp_log_size = (cap & PCI_EXP_DPC_RP_PIO_LOG_SIZE) >> 8;
>> - if (dpc->rp_log_size < 4 || dpc->rp_log_size > 9) {
>> - pci_err(pdev, "RP PIO log size %u is invalid\n",
>> - dpc->rp_log_size);
>> - dpc->rp_log_size = 0;
>> - }
>> - }
>> + ctl = dpc->ctl;
>> + cap = dpc->cap;
>>
>> ctl = (ctl & 0xfff4) | PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN;
>> pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
>> diff --git a/drivers/pci/pcie/dpc.h b/drivers/pci/pcie/dpc.h
>> new file mode 100644
>> index 000000000000..2d82bc917fcb
>> --- /dev/null
>> +++ b/drivers/pci/pcie/dpc.h
>> @@ -0,0 +1,20 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +#ifndef DRIVERS_PCIE_DPC_H
>> +#define DRIVERS_PCIE_DPC_H
>> +
>> +#include <linux/pci.h>
>> +
>> +struct dpc_dev {
>> + struct pci_dev *pdev;
>> + u16 cap_pos;
>> + bool rp_extensions;
>> + u8 rp_log_size;
>> + u16 ctl;
>> + u16 cap;
>> +};
>> +
>> +pci_ers_result_t dpc_reset_link_common(struct dpc_dev *dpc);
>> +void dpc_process_error(struct dpc_dev *dpc);
>> +void dpc_dev_init(struct pci_dev *pdev, struct dpc_dev *dpc);
>> +
>> +#endif /* DRIVERS_PCIE_DPC_H */
>> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
>> index eefefe03857a..e7b9dfae9035 100644
>> --- a/drivers/pci/pcie/err.c
>> +++ b/drivers/pci/pcie/err.c
>> @@ -162,11 +162,18 @@ static pci_ers_result_t default_reset_link(struct pci_dev *dev)
>> return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
>> }
>>
>> -static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
>> +static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service,
>> + pci_ers_result_t (*reset_cb)(void *cb_data),
>> + void *cb_data)
> This rejiggering of reset_link() and pcie_do_recovery() is unrelated
> to the rest (except that it's needed for EDR, of course), so maybe
> could be a separate patch.
ok
>
> We could also consider changing the interface of pcie_do_recovery() to
> just add reset_cb and cb_data, and change the existing callers to pass
> NULL, NULL. Then we wouldn't need pcie_do_recovery_common(). I'm not
> sure which way would be better.
I will change the pcie_do_recovery. Currently only aer and dpc drivers
uses it.
>
>> {
>> pci_ers_result_t status;
>> struct pcie_port_service_driver *driver = NULL;
>>
>> + if (reset_cb) {
>> + status = reset_cb(cb_data);
>> + goto done;
>> + }
>> +
>> driver = pcie_port_find_service(dev, service);
>> if (driver && driver->reset_link) {
>> status = driver->reset_link(dev);
>> @@ -178,6 +185,7 @@ static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
>> return PCI_ERS_RESULT_DISCONNECT;
>> }
>>
>> +done:
>> if (status != PCI_ERS_RESULT_RECOVERED) {
>> pci_printk(KERN_DEBUG, dev, "link reset at upstream device %s failed\n",
>> pci_name(dev));
>> @@ -187,8 +195,11 @@ static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
>> return status;
>> }
>>
>> -void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
>> - u32 service)
>> +pci_ers_result_t pcie_do_recovery_common(struct pci_dev *dev,
>> + enum pci_channel_state state,
>> + u32 service,
>> + pci_ers_result_t (*reset_cb)(void *cb_data),
>> + void *cb_data)
>> {
>> pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
>> struct pci_bus *bus;
>> @@ -209,7 +220,7 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
>> pci_walk_bus(bus, report_normal_detected, &status);
>>
>> if (state == pci_channel_io_frozen) {
>> - status = reset_link(dev, service);
>> + status = reset_link(dev, service, reset_cb, cb_data);
>> if (status != PCI_ERS_RESULT_RECOVERED)
>> goto failed;
>> }
>> @@ -240,11 +251,20 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
>> pci_aer_clear_device_status(dev);
>> pci_cleanup_aer_uncorrect_error_status(dev);
>> pci_info(dev, "device recovery successful\n");
>> - return;
>> +
>> + return status;
>>
>> failed:
>> pci_uevent_ers(dev, PCI_ERS_RESULT_DISCONNECT);
>>
>> /* TODO: Should kernel panic here? */
>> pci_info(dev, "device recovery failed\n");
>> +
>> + return status;
>> +}
>> +
>> +void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
>> + u32 service)
>> +{
>> + pcie_do_recovery_common(dev, state, service, NULL, NULL);
>> }
>> --
>> 2.21.0
>>
--
Sathyanarayanan Kuppuswamy
Linux kernel developer

\
 
 \ /
  Last update: 2020-02-26 20:34    [W:3.098 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site