lkml.org 
[lkml]   [2020]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/5] dt-bindings: soc: document LiteX SoC Controller bindings
Hi Mateusz,

On Tue, Feb 25, 2020 at 09:46:45AM +0100, Mateusz Holenko wrote:
> From: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
>
> Add documentation for LiteX SoC Controller bindings.
>
> Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
> Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
> ---
>
> Notes:
> This commit has been introduced in v3 of the patchset.
>
> .../soc/litex/litex,soc_controller.yaml | 46 +++++++++++++++++++
> MAINTAINERS | 6 +++
> 2 files changed, 52 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/litex/litex,soc_controller.yaml
>
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc_controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc_controller.yaml
> new file mode 100644
> index 000000000000..039894265319
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc_controller.yaml
> @@ -0,0 +1,46 @@
> +PDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/litex/litex,soc_controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LiteX SoC Controller driver
> +
> +description: |
> + This is the SoC Controller driver for the LiteX SoC Builder.
> + It's purpose is to verify LiteX CSR (Control&Status Register) access
> + operations and provide function for other drivers to read/write CSRs
> + and to check if those accessors are ready to use.
> +
> +maintainers:
> + - Karol Gugala <kgugala@antmicro.com>
> + - Mateusz Holenko <mholenko@antmicro.com>
> +
> +properties:
> + compatible:
> + const: litex,soc_controller

Usually compatible will use dash as separators, not underscores.

> + reg:
> + description: Base address and length of the register space

This is usually removed since it's what's expected from the property
anyway. However, what you should really test for in the number of
address/size couples being set, and you can do that using maxItems: 1

> + status:
> + description: |
> + disables or enables node
> +
> + const: "okay"

This is added automatically by the tooling, so you can leave it out.

> +required:
> + - compatible
> + - reg
> + - status

And in general, status is not required. Leaving status out is
equivalent to status = "okay"

> +examples:
> + - |
> +
> + soc_ctrl0: soc_controller@f0000000 {
> + compatible = "litex,soc_controller";
> + reg = <0x0 0xf0000000 0x0 0xC>;
> + status = "okay";
> + };

The indentation looks weird here?

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-02-25 10:11    [W:0.111 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site