Messages in this thread Patch in this message | | | From | Amit Kucheria <> | Subject | [PATCH v1 1/3] dt-bindings: thermal: tsens: Make dtbs_check pass for sc7180 tsens | Date | Tue, 25 Feb 2020 13:01:20 +0530 |
| |
Fixes the following warnings: builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens', 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible causes of the failure): builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens', 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible causes of the failure): builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8916-tsens', 'qcom,msm8974-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8976-tsens', 'qcom,qcs404-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens'] builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml: thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> --- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index eef13b9446a8..13e294328932 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -39,6 +39,7 @@ properties: - qcom,msm8996-tsens - qcom,msm8998-tsens - qcom,sdm845-tsens + - qcom,sc7180-tsens - const: qcom,tsens-v2 reg: -- 2.20.1
| |