lkml.org 
[lkml]   [2020]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] dt: psci: Add arm,psci-sys-reset2-type property
On Fri, Feb 21, 2020 at 03:28:03PM -0800, Elliot Berman wrote:
> Some implementors of PSCI may relax the requirements of the PSCI
> architectural warm reset. In order to comply with PSCI specification, a
> different reset_type value must be used. The alternate PSCI
> SYSTEM_RESET2 may be used in all warm/soft reboot scenarios, replacing
> the architectural warm reset.
>
> Signed-off-by: Elliot Berman <eberman@codeaurora.org>
> ---
> Documentation/devicetree/bindings/arm/psci.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
> index 8ef8542..a790e5a 100644
> --- a/Documentation/devicetree/bindings/arm/psci.yaml
> +++ b/Documentation/devicetree/bindings/arm/psci.yaml
> @@ -102,6 +102,11 @@ properties:
> [1] Kernel documentation - ARM idle states bindings
> Documentation/devicetree/bindings/arm/idle-states.txt
>
> + arm,psci-sys-reset2-type:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + reset_type parameter value to use during a warm or soft reboot.
> +

I would rather use param instead of type in the name.

--
Regards,
Sudeep

\
 
 \ /
  Last update: 2020-02-24 10:52    [W:0.046 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site