lkml.org 
[lkml]   [2020]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 5/8] net: sungem: use pci_status_get_and_clear_errors
From
Date
Use new helper pci_status_get_and_clear_errors() to simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/net/ethernet/sun/sungem.c | 30 +++++++++---------------------
1 file changed, 9 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c
index 8358064fb..2d392a7b1 100644
--- a/drivers/net/ethernet/sun/sungem.c
+++ b/drivers/net/ethernet/sun/sungem.c
@@ -545,37 +545,25 @@ static int gem_pci_interrupt(struct net_device *dev, struct gem *gp, u32 gem_sta
}

if (pci_estat & GREG_PCIESTAT_OTHER) {
- u16 pci_cfg_stat;
+ int pci_errs;

/* Interrogate PCI config space for the
* true cause.
*/
- pci_read_config_word(gp->pdev, PCI_STATUS,
- &pci_cfg_stat);
- netdev_err(dev, "Read PCI cfg space status [%04x]\n",
- pci_cfg_stat);
- if (pci_cfg_stat & PCI_STATUS_PARITY)
+ pci_errs = pci_status_get_and_clear_errors(gp->pdev);
+ netdev_err(dev, "PCI status errors[%04x]\n", pci_errs);
+ if (pci_errs & PCI_STATUS_PARITY)
netdev_err(dev, "PCI parity error detected\n");
- if (pci_cfg_stat & PCI_STATUS_SIG_TARGET_ABORT)
+ if (pci_errs & PCI_STATUS_SIG_TARGET_ABORT)
netdev_err(dev, "PCI target abort\n");
- if (pci_cfg_stat & PCI_STATUS_REC_TARGET_ABORT)
+ if (pci_errs & PCI_STATUS_REC_TARGET_ABORT)
netdev_err(dev, "PCI master acks target abort\n");
- if (pci_cfg_stat & PCI_STATUS_REC_MASTER_ABORT)
+ if (pci_errs & PCI_STATUS_REC_MASTER_ABORT)
netdev_err(dev, "PCI master abort\n");
- if (pci_cfg_stat & PCI_STATUS_SIG_SYSTEM_ERROR)
+ if (pci_errs & PCI_STATUS_SIG_SYSTEM_ERROR)
netdev_err(dev, "PCI system error SERR#\n");
- if (pci_cfg_stat & PCI_STATUS_DETECTED_PARITY)
+ if (pci_errs & PCI_STATUS_DETECTED_PARITY)
netdev_err(dev, "PCI parity error\n");
-
- /* Write the error bits back to clear them. */
- pci_cfg_stat &= (PCI_STATUS_PARITY |
- PCI_STATUS_SIG_TARGET_ABORT |
- PCI_STATUS_REC_TARGET_ABORT |
- PCI_STATUS_REC_MASTER_ABORT |
- PCI_STATUS_SIG_SYSTEM_ERROR |
- PCI_STATUS_DETECTED_PARITY);
- pci_write_config_word(gp->pdev,
- PCI_STATUS, pci_cfg_stat);
}

/* For all PCI errors, we should reset the chip. */
--
2.25.1

\
 
 \ /
  Last update: 2020-02-24 22:30    [W:0.088 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site