lkml.org 
[lkml]   [2020]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/3] dt-bindings: mfd: Add Gateworks System Controller bindings
Date
This patch adds documentation of device-tree bindings for the
Gateworks System Controller (GSC).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v5:
- resolve dt_binding_check issues

v4:
- move to using pwm<n>_auto_point<m>_{pwm,temp} for FAN PWM
- remove unncessary resolution/scaling properties for ADCs
- update to yaml
- remove watchdog

v3:
- replaced _ with -
- remove input bindings
- added full description of hwmon
- fix unit address of hwmon child nodes
---
.../devicetree/bindings/mfd/gateworks-gsc.yaml | 158 +++++++++++++++++++++
1 file changed, 158 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml

diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
new file mode 100644
index 00000000..f7c1a05
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gateworks System Controller multi-function device
+
+description: |
+ The GSC is a Multifunction I2C slave device with the following submodules:
+ - Watchdog Timer
+ - GPIO
+ - Pushbutton controller
+ - Hardware Monitore with ADC's for temperature and voltage rails and
+ fan controller
+
+maintainers:
+ - Tim Harvey <tharvey@gateworks.com>
+ - Robert Jones <rjones@gateworks.com>
+
+properties:
+ $nodename:
+ pattern: "gsc@[0-9a-f]{1,2}"
+ compatible:
+ const: gw,gsc
+
+ reg:
+ description: I2C device address
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+ description: The IRQ number
+
+ hwmon:
+ type: object
+ description: Optional Hardware Monitoring module
+
+ properties:
+ compatible:
+ const: gw,gsc-hwmon
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ gw,fan-base:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The fan controller base address
+
+ patternProperties:
+ "^adc@[0-2]$":
+ type: object
+ description: |
+ Properties for a single ADC which can report cooked values
+ (ie temperature sensor based on thermister), raw values
+ (ie voltage rail with a pre-scaling resistor divider).
+
+ properties:
+ reg:
+ description: Register of the ADC
+ maxItems: 1
+
+ label:
+ description: Name of the ADC input
+
+ type:
+ description: |
+ temperature in C*10 (temperature),
+ pre-scaled voltage value (voltage),
+ or scaled based on an optional resistor divider and optional
+ offset (voltage-raw)
+ enum:
+ - temperature
+ - voltage
+ - voltage-raw
+
+ gw,voltage-divider:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: values of resistors for divider on raw ADC input
+ items:
+ - description: R1
+ - description: R2
+
+ gw,voltage-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ A positive uV voltage offset to apply to a raw ADC
+ (ie to compensate for a diode drop).
+
+ required:
+ - type
+ - reg
+ - label
+
+ required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ hwmon {
+ compatible = "gw,gsc-hwmon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gw,fan-base = <0x2c>;
+
+ adc@0 { /* A0: Board Temperature */
+ type = "temperature";
+ reg = <0x00>;
+ label = "temp";
+ };
+
+ adc@2 { /* A1: Input Voltage (raw ADC) */
+ type = "voltage-raw";
+ reg = <0x02>;
+ label = "vdd_vin";
+ gw,voltage-divider = <22100 1000>;
+ gw,voltage-offset = <800000>;
+ };
+
+ adc@b { /* A2: Battery voltage */
+ type = "voltage";
+ reg = <0x0b>;
+ label = "vdd_bat";
+ };
+ };
+ };
+ };
--
2.7.4
\
 
 \ /
  Last update: 2020-02-24 21:55    [W:0.091 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site