lkml.org 
[lkml]   [2020]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v1 1/3] dt-bindings: thermal: Add yaml bindings for thermal sensors
On Mon, 24 Feb 2020 12:55:35 +0530, Amit Kucheria wrote:
> As part of moving the thermal bindings to YAML, split it up into 3
> bindings: thermal sensors, cooling devices and thermal zones.
>
> The property #thermal-sensor-cells is required in each device that acts
> as a thermal sensor. It is used to uniquely identify the instance of the
> thermal sensor inside the system.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> .../bindings/thermal/thermal-sensor.yaml | 70 +++++++++++++++++++
> 1 file changed, 70 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
>

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-sensor.example.dt.yaml: thermal-sensor@c263000: interrupt-names: ['uplow'] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-sensor.example.dt.yaml: thermal-sensor@c263000: interrupts: [[0, 506, 4]] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-sensor.example.dt.yaml: thermal-sensor@c265000: interrupt-names: ['uplow'] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-sensor.example.dt.yaml: thermal-sensor@c265000: interrupts: [[0, 507, 4]] is too short

See https://patchwork.ozlabs.org/patch/1242845
Please check and re-submit.

\
 
 \ /
  Last update: 2020-02-24 19:40    [W:0.088 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site