lkml.org 
[lkml]   [2020]   [Feb]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2 07/18] microblaze: Replace setup_irq() by request_irq()
request_irq() is preferred over setup_irq(). The early boot setup_irq()
invocations happen either via 'init_IRQ()' or 'time_init()', while
memory allocators are ready by 'mm_init()'.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

Seldom remove_irq() usage has been observed coupled with setup_irq(),
wherever that has been found, it too has been replaced by free_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---

v2:
* Replace pr_err("request_irq() on %s failed" by
pr_err("%s: request_irq() failed"
* Commit message massage

arch/microblaze/kernel/timer.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index a6683484b3a1..f8832cf49384 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -161,13 +161,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}

-static struct irqaction timer_irqaction = {
- .handler = timer_interrupt,
- .flags = IRQF_TIMER,
- .name = "timer",
- .dev_id = &clockevent_xilinx_timer,
-};
-
static __init int xilinx_clockevent_init(void)
{
clockevent_xilinx_timer.mult =
@@ -309,7 +302,8 @@ static int __init xilinx_timer_init(struct device_node *timer)

freq_div_hz = timer_clock_freq / HZ;

- ret = setup_irq(irq, &timer_irqaction);
+ ret = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer",
+ &clockevent_xilinx_timer);
if (ret) {
pr_err("Failed to setup IRQ");
return ret;
--
2.25.1
\
 
 \ /
  Last update: 2020-02-24 01:51    [W:0.198 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site