lkml.org 
[lkml]   [2020]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] kbuild: move -pipe to global KBUILD_CFLAGS
On Sat, Feb 22, 2020 at 11:07:14AM +0900, Masahiro Yamada wrote:
> On Sat, Feb 22, 2020 at 9:40 AM Alex Xu (Hello71) <alex_y_xu@yahoo.ca> wrote:
> >
> > -pipe reduces unnecessary disk wear for systems where /tmp is not a
> > tmpfs, slightly increases compilation speed, and avoids leaving behind
> > files when gcc crashes.
> >
> > According to the gcc manual, "this fails to work on some systems where
> > the assembler is unable to read from a pipe; but the GNU assembler has
> > no trouble". We already require GNU ld on all platforms, so this is not
> > an additional dependency. LLVM as also supports pipes.
> >
> > -pipe has always been used for most architectures, this change
> > standardizes it globally. Most notably, arm, arm64, riscv, and x86 are
> > affected.
> >
> > Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
>
> <snip>
>
> > diff --git a/arch/arc/Makefile b/arch/arc/Makefile
> > index 20e9ab6cc521..b6a2f553771c 100644
> > --- a/arch/arc/Makefile
> > +++ b/arch/arc/Makefile
> > @@ -9,7 +9,7 @@ ifeq ($(CROSS_COMPILE),)
> > CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
> > endif
> >
> > -cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
> > +cflags-y += -fno-common -fno-builtin -mmedium-calls -D__linux__
> > cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7
> > cflags-$(CONFIG_ISA_ARCV2) += -mcpu=hs38
> >
> > diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> > index db857d07114f..7711467e0797 100644
> > --- a/arch/arm/Makefile
> > +++ b/arch/arm/Makefile
> > @@ -21,7 +21,6 @@ KBUILD_LDS_MODULE += $(srctree)/arch/arm/kernel/module.lds
> > endif
> >
> > GZFLAGS :=-9
> > -#KBUILD_CFLAGS +=-pipe
>
>
> This was commented out by a very old commit,
> which is available in the historical git tree.
>
> https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=ce20ed858a20f6f04de475cae79e40d3697f4776
>
> But, I could not parse the reason from the commit message.
> Russell, do you remember why?

-pipe may reduce the disk load but increases the CPU load, so it's an
option that's up to the build environment. One may wish to pass a
lower parralellism when using -pipe to make to mitigate that, but both
options are up to the build environment to decide upon.

If we unconditionally add -pipe, then we take away choice.

--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

\
 
 \ /
  Last update: 2020-02-22 10:02    [W:0.898 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site