lkml.org 
[lkml]   [2020]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 03/10] ASoC: tegra: add Tegra210 based DMIC driver
From
Date
20.02.2020 09:34, Sameer Pujar пишет:
> The Digital MIC (DMIC) Controller is used to interface with Pulse Density
> Modulation (PDM) input devices. The DMIC controller implements a converter
> to convert PDM signals to Pulse Code Modulation (PCM) signals. From signal
> flow perspective, the DMIC can be viewed as a PDM receiver.
>
> This patch registers DMIC component with ASoC framework. The component
> driver exposes DAPM widgets, routes and kcontrols for the device. The DAI
> driver exposes DMIC interfaces, which can be used to connect different
> components in the ASoC layer. Makefile and Kconfig support is added to
> allow to build the driver. The DMIC devices can be enabled in the DT via
> "nvidia,tegra210-dmic" compatible string. This driver can be used for
> Tegra186 and Tegra194 chips as well.
>
> Signed-off-by: Sameer Pujar <spujar@nvidia.com>
> ---

...

> +static const struct of_device_id tegra210_dmic_of_match[] = {
> + { .compatible = "nvidia,tegra210-dmic" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, tegra210_dmic_of_match);

I'd move the tegra210_dmic_of_match close to tegra210_dmic_driver's
definition, like most of the other drivers do it.

...

> +static struct platform_driver tegra210_dmic_driver = {
> + .driver = {
> + .name = "tegra210-dmic",
> + .of_match_table = tegra210_dmic_of_match,
> + .pm = &tegra210_dmic_pm_ops,
> + },
> + .probe = tegra210_dmic_probe,
> + .remove = tegra210_dmic_remove,
> +};
> +module_platform_driver(tegra210_dmic_driver)

Otherwise:

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>

\
 
 \ /
  Last update: 2020-02-21 06:54    [W:0.189 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site