lkml.org 
[lkml]   [2020]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/8] arm64: dts: qcom: qcs404: Add IMEM and PIL info region
On Mon, Feb 10, 2020 at 04:50:55PM -0800, Bjorn Andersson wrote:
> Add a simple-mfd representing IMEM on QCS404 and define the PIL
> relocation info region, so that post mortem tools will be able to locate
> the loaded remoteprocs.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Changes since v2:
> - Replace offset with reg
>
> arch/arm64/boot/dts/qcom/qcs404.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index 4ee1e3d5f123..f539293b875c 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -997,6 +997,19 @@ blsp2_spi0: spi@7af5000 {
> status = "disabled";
> };
>
> + imem@8600000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x08600000 0x1000>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + pil-reloc@94c {
> + compatible ="qcom,pil-reloc-info";

s/="/= "

> + reg = <0x94c 200>;
> + };
> + };
> +
> intc: interrupt-controller@b000000 {
> compatible = "qcom,msm-qgic2";
> interrupt-controller;
> --
> 2.24.0
>

\
 
 \ /
  Last update: 2020-02-20 21:48    [W:0.088 / U:11.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site