lkml.org 
[lkml]   [2020]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/3] dt-bindings: iio: frequency: Add docs for ADF4360 PLL
On Tue, 28 Jan 2020 13:13:01 +0200
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:

> From: Edward Kigwana <ekigwana@gmail.com>
>
> This change adds the device-tree bindings documentation for the ADF4360
> family of PLLs.
>
> Signed-off-by: Edward Kigwana <ekigwana@gmail.com>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> ---
> .../bindings/iio/frequency/adi,adf4360.yaml | 137 ++++++++++++++++++
> 1 file changed, 137 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml
> new file mode 100644
> index 000000000000..895e2cb2b300
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml
> @@ -0,0 +1,137 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright 2019-2020 Edward Kigwana
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/frequency/adi,adf4360.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADF4360 PLL device driver

This isn't a driver, so don't mention "device driver" It's a binding
for the hardware.

> +
> +maintainers:
> + - Lars-Peter Clausen <lars@metafoo.de>
> + - Edward Kigwana <ekigwana@gmail.com>
> +
> +description: |
> + Bindings for the Analog Devices ADF4360 family of clock generator phase-locked
> + loop (PLL) devices with an integrated voltage-controlled oscillator (VCO).
> + Each of the parts in the family supports a specific frequency range.
> + Datasheets can be found here:
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-0.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-1.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-2.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-3.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-4.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-5.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-6.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-7.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-8.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-9.pdf
> +
> +properties:
> + compatible:
> + pattern: '^adi,adf4360-[0-9]$'
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: clkin
> +
> + '#clock-cells':
> + const: 0
> +
> + adi,loop-filter-pfd-frequency-hz:
> + description: |
> + The phase-frequency-detector frequency that the external loop filter was
> + designed for.
> + allOf:
> + - minimum: 25000
> + - maximum: 8000000
> + maxItems: 1
> +
> + adi,loop-filter-charger-pump-current-microamp:
> + description: |
> + The charge pump current that the external loop filter was designed for.
> + The provided value is clamped to the closest enumerated value.
> + enum: [ 310, 620, 930, 1250, 1560, 1870, 2180, 2500 ]
> +
> + adi,vco-minimum-frequency-hz:
> + description: |
> + Required for ADF4360-7, ADF4360-8 and ADF4360-9. Minimum VCO frequency
> + that can be supported by the tuning range set by the external inductor.
> + maxItems: 1
> +
> + adi,vco-maximum-frequency-hz:
> + description: |
> + Required for ADF4360-7, ADF4360-8 and ADF4360-9. Maximum VCO frequency
> + that can be supported by the tuning range set by the external inductor.
> + maxItems: 1
> +
> + adi,loop-filter-inverting:
> + description: Indicates that the external loop filter is an inverting filter.
> + type: boolean
> +
> + adi,power-up-frequency-hz:
> + description: |
> + PLL tunes to the set frequency on probe or defaults to either the minimum
> + for the part or value set using adi,vco-minimum-frequency-hz.
> + maxItems: 1
> +
> + vdd-supply:
> + description: |
> + vdd supply is used to enable or disable chip when regulator power down
> + mode is set. Other power down modes are used to mitigate the case of a
> + shared regulator.
> +
> + enable-gpios:
> + description: |
> + Chip enable gpio is used to enable or disable chip when chip enable power
> + down mode is set.
> + maxItems: 1
> +
> + adi,muxout-gpios:
> + description: |
> + MUX out gpio is used to detect chip and test pll lock state on read when
> + muxout control is set to lock detect.
> + maxItems: 1

This is a debug feature I think? If so probably shouldn't be in dt, but
perhaps I am missing something?

> +
> + adi,power-out-level-microamp:
> + description: |
> + Chip support setting of output power level. This property is optional.
> + If it is not provided by default 11000 uA will be set.
> + enum: [ 3500, 5000, 7500, 11000 ]
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - adi,loop-filter-charge-pump-current
> + - adi,loop-filter-pfd-frequency-hz
> +
> +examples:
> + - |
> + spi0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pll@0 {
> + compatible = "adi,adf4360-7";
> + reg = <0>;
> + spi-max-frequency = <2000000>;
> + clocks = <&ref_clock>;
> + #clock-cells = <0>;
> + clock-names = "clkin";
> + clock-output-names = "adf4360-7";
> +
> + adi,loop-filter-charge-pump-current = <5>;
> + adi,loop-filter-pfd-frequency-hz = <2500000>;
> + adi,vco-minimum-frequency-hz = <700000000>;
> + adi,vco-maximum-frequency-hz = <840000000>;
> + };
> + };
> +...

\
 
 \ /
  Last update: 2020-02-02 15:48    [W:0.133 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site