lkml.org 
[lkml]   [2020]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/4] mfd: rn5t618: add ADC support
Date
mfd: rn5t618: add ADC support

This series adds support for the ADC in the RN5T618/RC5T619.
It depends on the IRQ support added in the RTC support series here:
https://lore.kernel.org/lkml/20191220122416.31881-1-andreas@kemnade.info/

I tested the driver only with the RC5T619 but it should work with the with
the RN5T618 as well based on these facts:
- The corresponding register definitions originally went into the kernel
for the RN5T618
- Public datasheet sections about the ADC look same.
- Out-of-tree code for these chips look same regarding to ADC

But due to missing hardware I cannot test the patches 2/3 and 3/3 which
add support for the RN5T618 ADC.
I marked these untested patches as RFC, and IMHO they require a Tested-By.
Feel free to ignore them if the whole series would be delayed just because
of missing Tested-By for those.

Changes in v3:
- re-included former 2/5 of these patches, since it was not applied

Changes in v2:
- got an "Applied, thanks" message for the first two, so I do not include
them anymore
- some cleanups for the ADC driver itself

Andreas Kemnade (4):
mfd: rn5t618: add ADC subdevice for RC5T619
iio: adc: rn5t618: Add ADC driver for RN5T618/RC5T619
mfd: rn5t618: add IRQ definitions for RN5T618
mfd: rn5t618: add ADC subdevice for RN5T618

drivers/iio/adc/Kconfig | 10 ++
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/rn5t618-adc.c | 258 ++++++++++++++++++++++++++++++++++
drivers/mfd/rn5t618.c | 48 ++++++-
4 files changed, 315 insertions(+), 2 deletions(-)
create mode 100644 drivers/iio/adc/rn5t618-adc.c

--
2.20.1

\
 
 \ /
  Last update: 2020-02-18 07:21    [W:0.099 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site