lkml.org 
[lkml]   [2020]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] extcon: palmas: hide error messages if gpio returns -EPROBE_DEFER
From
Date
On 2/18/20 7:21 PM, Ladislav Michl wrote:
> On Tue, Feb 18, 2020 at 12:28:25PM +0900, Chanwoo Choi wrote:
>> On 2/17/20 10:38 PM, H. Nikolaus Schaller wrote:
>>> If the gpios are probed after this driver (e.g. if they
>>> come from an i2c expander) there is no need to print an
>>> error message.
>>>
>>> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
>>> ---
>>> drivers/extcon/extcon-palmas.c | 8 ++++++--
>>> 1 file changed, 6 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
>>> index edc5016f46f1..cea58d0cb457 100644
>>> --- a/drivers/extcon/extcon-palmas.c
>>> +++ b/drivers/extcon/extcon-palmas.c
>>> @@ -205,14 +205,18 @@ static int palmas_usb_probe(struct platform_device *pdev)
>>>
>>> palmas_usb->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id",
>>> GPIOD_IN);
>>> - if (IS_ERR(palmas_usb->id_gpiod)) {
>>> + if (PTR_ERR(palmas_usb->id_gpiod) == -EPROBE_DEFER) {
>>> + return -EPROBE_DEFER;
>>> + } else if (IS_ERR(palmas_usb->id_gpiod)) {
>>> dev_err(&pdev->dev, "failed to get id gpio\n");
>>> return PTR_ERR(palmas_usb->id_gpiod);
>>> }
>>>
>>> palmas_usb->vbus_gpiod = devm_gpiod_get_optional(&pdev->dev, "vbus",
>>> GPIOD_IN);
>>> - if (IS_ERR(palmas_usb->vbus_gpiod)) {
>>> + if (PTR_ERR(palmas_usb->vbus_gpiod) == -EPROBE_DEFER) {
>>> + return -EPROBE_DEFER;
>>> + } else if (IS_ERR(palmas_usb->vbus_gpiod)) {
>>> dev_err(&pdev->dev, "failed to get vbus gpio\n");
>>> return PTR_ERR(palmas_usb->vbus_gpiod);
>>> }
>>>
>>
>> I think that it is enough to handle the -EPROBE_DEFER.
>> Also, I prefer to use single if/else statement
>> instead of the nested if/else statement.
>>
>> Applied it.
>
> Uh... As it is? Then it is matter of time it triggers someones cocci
> script pointing to else after return. Could you at least fix this?

Sorry. I don't understand. Do you mean that this patch has the
some issue of cocci script?

I think that it fixes the probe sequence issue
between extcon-palmas and gpio driver. It is not related to
any result from cocci script. If the extcon-palmas.c has
the issue by cocci or checkpatch, anyone can send the other patch
for fixup.

I think that it is enough to fix the issue which is only
related to the probe sequence between gpio and extcon-palmas.c

>
> Thanks,
> ladis
>
>


--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2020-02-18 11:28    [W:2.736 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site