lkml.org 
[lkml]   [2020]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] GPU: DRM: VC4/V3D Replace wait_for macros in to remove use of msleep
Date
The wait_for macro's for Broadcom VC4 and V3D drivers used msleep
which is inappropriate due to its inaccuracy at low values (minimum
wait time is about 30ms on the Raspberry Pi).

This patch replaces the macro with the one from the Intel i915 version
which uses usleep_range to provide more accurate waits.

Signed-off-by: James Hughes <james.hughes@raspberrypi.com>
---
drivers/gpu/drm/v3d/v3d_drv.h | 41 ++++++++++++++++++++++-----------
drivers/gpu/drm/vc4/vc4_drv.h | 43 +++++++++++++++++++++--------------
2 files changed, 54 insertions(+), 30 deletions(-)

diff --git a/drivers/gpu/drm/v3d/v3d_drv.h b/drivers/gpu/drm/v3d/v3d_drv.h
index 7b4f3b5a086e..069fefe16d28 100644
--- a/drivers/gpu/drm/v3d/v3d_drv.h
+++ b/drivers/gpu/drm/v3d/v3d_drv.h
@@ -267,27 +267,42 @@ struct v3d_csd_job {
};

/**
- * _wait_for - magic (register) wait macro
+ * __wait_for - magic wait macro
*
- * Does the right thing for modeset paths when run under kdgb or similar atomic
- * contexts. Note that it's important that we check the condition again after
- * having timed out, since the timeout could be due to preemption or similar and
- * we've never had a chance to check the condition before the timeout.
+ * Macro to help avoid open coding check/wait/timeout patterns. Note that it's
+ * important that we check the condition again after having timed out, since the
+ * timeout could be due to preemption or similar and we've never had a chance to
+ * check the condition before the timeout.
*/
-#define wait_for(COND, MS) ({ \
- unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1; \
- int ret__ = 0; \
- while (!(COND)) { \
- if (time_after(jiffies, timeout__)) { \
- if (!(COND)) \
- ret__ = -ETIMEDOUT; \
+#define __wait_for(OP, COND, US, Wmin, Wmax) ({ \
+ const ktime_t end__ = ktime_add_ns(ktime_get_raw(), 1000ll * (US)); \
+ long wait__ = (Wmin); /* recommended min for usleep is 10 us */ \
+ int ret__; \
+ might_sleep(); \
+ for (;;) { \
+ const bool expired__ = ktime_after(ktime_get_raw(), end__); \
+ OP; \
+ /* Guarantee COND check prior to timeout */ \
+ barrier(); \
+ if (COND) { \
+ ret__ = 0; \
break; \
} \
- msleep(1); \
+ if (expired__) { \
+ ret__ = -ETIMEDOUT; \
+ break; \
+ } \
+ usleep_range(wait__, wait__ * 2); \
+ if (wait__ < (Wmax)) \
+ wait__ <<= 1; \
} \
ret__; \
})

+#define _wait_for(COND, US, Wmin, Wmax) __wait_for(, (COND), (US), (Wmin), \
+ (Wmax))
+#define wait_for(COND, MS) _wait_for((COND), (MS) * 1000, 10, 1000)
+
static inline unsigned long nsecs_to_jiffies_timeout(const u64 n)
{
/* nsecs_to_jiffies64() does not guard against overflow */
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 7956f6ed9b6a..c59be5e1d52b 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -629,32 +629,41 @@ struct vc4_validated_shader_info {
};

/**
- * _wait_for - magic (register) wait macro
+ * __wait_for - magic wait macro
*
- * Does the right thing for modeset paths when run under kdgb or similar atomic
- * contexts. Note that it's important that we check the condition again after
- * having timed out, since the timeout could be due to preemption or similar and
- * we've never had a chance to check the condition before the timeout.
+ * Macro to help avoid open coding check/wait/timeout patterns. Note that it's
+ * important that we check the condition again after having timed out, since the
+ * timeout could be due to preemption or similar and we've never had a chance to
+ * check the condition before the timeout.
*/
-#define _wait_for(COND, MS, W) ({ \
- unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1; \
- int ret__ = 0; \
- while (!(COND)) { \
- if (time_after(jiffies, timeout__)) { \
- if (!(COND)) \
- ret__ = -ETIMEDOUT; \
+#define __wait_for(OP, COND, US, Wmin, Wmax) ({ \
+ const ktime_t end__ = ktime_add_ns(ktime_get_raw(), 1000ll * (US)); \
+ long wait__ = (Wmin); /* recommended min for usleep is 10 us */ \
+ int ret__; \
+ might_sleep(); \
+ for (;;) { \
+ const bool expired__ = ktime_after(ktime_get_raw(), end__); \
+ OP; \
+ /* Guarantee COND check prior to timeout */ \
+ barrier(); \
+ if (COND) { \
+ ret__ = 0; \
break; \
} \
- if (W && drm_can_sleep()) { \
- msleep(W); \
- } else { \
- cpu_relax(); \
+ if (expired__) { \
+ ret__ = -ETIMEDOUT; \
+ break; \
} \
+ usleep_range(wait__, wait__ * 2); \
+ if (wait__ < (Wmax)) \
+ wait__ <<= 1; \
} \
ret__; \
})

-#define wait_for(COND, MS) _wait_for(COND, MS, 1)
+#define _wait_for(COND, US, Wmin, Wmax) __wait_for(, (COND), (US), (Wmin), \
+ (Wmax))
+#define wait_for(COND, MS) _wait_for((COND), (MS) * 1000, 10, 1000)

/* vc4_bo.c */
struct drm_gem_object *vc4_create_object(struct drm_device *dev, size_t size);
--
2.17.1
\
 
 \ /
  Last update: 2020-02-17 16:43    [W:0.391 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site