lkml.org 
[lkml]   [2020]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 4/7] ARM: dts: imx6sx-sabreauto: Use new pin names with DCE/DTE for UART pins
On Sat, Feb 15, 2020 at 01:15:55PM +0800, Anson Huang wrote:
> Use new pin names containing DCE/DTE for UART RX/TX/RTS/CTS pins, this
> is to distinguish the DCE/DTE functions.
>
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> arch/arm/boot/dts/imx6sx-sabreauto.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> index 315044c..8259244 100644
> --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
> +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> @@ -229,8 +229,8 @@
>
> pinctrl_uart1: uart1grp {
> fsl,pins = <
> - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
> - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
> + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
> + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1

Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>


--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |

\
 
 \ /
  Last update: 2020-02-17 09:36    [W:0.085 / U:1.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site