lkml.org 
[lkml]   [2020]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/5] dt-bindings: hwmon: Document adt7475 invert-pwm property
Date
Add binding information for the invert-pwm property.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Documentation/devicetree/bindings/hwmon/adt7475.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 61da90c82649..c11c9a3d9a64 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -50,6 +50,17 @@ patternProperties:
not bypassed. If the property is absent then the attenuator
retains it's configuration from the bios/bootloader.

+ "^invert-pwm[1-3]$":
+ maxItems: 1
+ minimum: 0
+ maximum: 1
+ description: |
+ Configures the pwm output to use inverted logic. If set to 1
+ the pwm uses a logic low output for 100% duty cycle. If set
+ to 0 the pwm uses a logic high output for 100% duty cycle.
+ If the property is absent the pwm retains it's configuration
+ from the bios/bootloader.
+
required:
- compatible
- reg
@@ -65,6 +76,7 @@ examples:
reg = <0x2e>;
bypass-attenuator-in0 = <1>;
bypass-attenuator-in1 = <0>;
+ invert-pwm1 = <1>;
};
};

--
2.25.0
\
 
 \ /
  Last update: 2020-02-18 00:47    [W:0.272 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site