lkml.org 
[lkml]   [2020]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] dt-bindings: hwmon: Document adt7475 bypass-attenuator property
Date
From: Logan Shaw <logan.shaw@alliedtelesis.co.nz>

Add documentation for the bypass-attenuator-in[0-4] property.

Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
.../devicetree/bindings/hwmon/adt7475.yaml | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 2252499ea201..61da90c82649 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -39,6 +39,17 @@ properties:
reg:
maxItems: 1

+patternProperties:
+ "^bypass-attenuator-in[0-4]$":
+ maxItems: 1
+ minimum: 0
+ maximum: 1
+ description: |
+ Configures bypassing the individual voltage input attenuator. If
+ set to 1 the attenuator is bypassed if set to 0 the attenuator is
+ not bypassed. If the property is absent then the attenuator
+ retains it's configuration from the bios/bootloader.
+
required:
- compatible
- reg
@@ -52,6 +63,8 @@ examples:
hwmon@2e {
compatible = "adi,adt7476";
reg = <0x2e>;
+ bypass-attenuator-in0 = <1>;
+ bypass-attenuator-in1 = <0>;
};
};

--
2.25.0
\
 
 \ /
  Last update: 2020-02-18 00:47    [W:0.141 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site