lkml.org 
[lkml]   [2020]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 2/2] pinctrl: rockchip: split rockchip pinctrl driver by SoC type
Date
Hi Jay,

Am Freitag, 17. Januar 2020, 09:13:58 CET schrieb Jianqun Xu:
> The pinctrl-rockchip driver grows larger by adding support for
> each new SoC, that make the kernel Image size too large since
> it only under one config named PINCTRL_ROCKCHIP.
>
> This patch split driver in the form of core driver + soc driver,
> - pinctrl-rockchip.c defined an platform probe register function
> - pinctrl-rkxxxx.c init module by matching compatible name
>
> For rockchip_defconfig, it needs to select all PINCTRL_RKxxxx to
> keep same with old driver.
>
> For some special defconfig, it can only select one PINCTRL_RKxxxx.
>
> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
> ---
> changes since v3:
> - add base patch with directory change only, suggested by Robin
> - rebase patch
>
> changes since v2:
> - remove rockchip_pinctrl_remove
> - rename rockchip_pinctrl_* to rockchip_pctrl_*
> - redule arguments for get_soc_data
> - add module author for each new driver files
> - add copyright for new driver files
>
> changes since v1:
> - add rockchip_pinctrl_remove
> - remove unused head files in pinctrl-rockchip.h
>
> drivers/pinctrl/rockchip/Kconfig | 114 +
> drivers/pinctrl/rockchip/Makefile | 14 +
> drivers/pinctrl/rockchip/pinctrl-px30.c | 224 ++
> drivers/pinctrl/rockchip/pinctrl-rk2928.c | 70 +
> drivers/pinctrl/rockchip/pinctrl-rk3036.c | 69 +
> drivers/pinctrl/rockchip/pinctrl-rk3066a.c | 72 +
> drivers/pinctrl/rockchip/pinctrl-rk3066b.c | 51 +
> drivers/pinctrl/rockchip/pinctrl-rk3128.c | 161 ++
> drivers/pinctrl/rockchip/pinctrl-rk3188.c | 147 ++
> drivers/pinctrl/rockchip/pinctrl-rk3228.c | 225 ++
> drivers/pinctrl/rockchip/pinctrl-rk3288.c | 210 ++
> drivers/pinctrl/rockchip/pinctrl-rk3308.c | 420 +++
> drivers/pinctrl/rockchip/pinctrl-rk3328.c | 272 ++
> drivers/pinctrl/rockchip/pinctrl-rk3368.c | 125 +
> drivers/pinctrl/rockchip/pinctrl-rk3399.c | 195 ++
> drivers/pinctrl/rockchip/pinctrl-rockchip.c | 2547 ++-----------------
> drivers/pinctrl/rockchip/pinctrl-rockchip.h | 388 +++
> drivers/pinctrl/rockchip/pinctrl-rv1108.c | 214 ++
> 18 files changed, 3149 insertions(+), 2369 deletions(-)

What Robin suggested, was doing this incrementally. So keep your patch1
but then do
- patch2: split out px30-pinctrl
- patch3: split out rk3288 pinctrl
- etc

Because even my mail client chokes on this massive 6000 line patch, so a
real review is actually very difficult.


> diff --git a/drivers/pinctrl/rockchip/Kconfig b/drivers/pinctrl/rockchip/Kconfig
> index 7a0077ca32dd..4873a05108f8 100644
> --- a/drivers/pinctrl/rockchip/Kconfig
> +++ b/drivers/pinctrl/rockchip/Kconfig
> @@ -5,8 +5,122 @@ if (ARCH_ROCKCHIP || COMPILE_TEST)
> config PINCTRL_ROCKCHIP
> bool
> select PINMUX
> + select PINCONF
> select GENERIC_PINCONF
> + select GPIOLIB_IRQCHIP
> select GENERIC_IRQ_CHIP
> select MFD_SYSCON
>
> +config PINCTRL_PX30
> + tristate "PX30 pin controller driver"
> + depends on GPIOLIB && OF
> + select PINCTRL_ROCKCHIP

you might want to add a
default y if ARM64
here
(similar default y if ARM for arm32 pinctrl drivers)

Because otherwise you're breaking peoples kernel configs and also
the default is to build a somewhat unified kernel in the default defconfigs,
so we want all matching pinctrl drivers by default and people then can
disable drivers if they really want to build a slimmed down kernel.

With the "if ARM" / "if ARM64" parts you even save some space by
default as well, as you build only the relevant drivers.


Heiko



\
 
 \ /
  Last update: 2020-02-15 12:13    [W:0.064 / U:5.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site