lkml.org 
[lkml]   [2020]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH AUTOSEL 5.5 203/542] PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in
    Date
    From: Wei Liu <wei.liu@kernel.org>

    [ Upstream commit 574f29036fce385e28617547955dd6911d375025 ]

    Previously quirk_paxc_bridge() was applied when the iproc driver was
    built-in, but not when it was compiled as a module.

    This happened because it was under #ifdef CONFIG_PCIE_IPROC_PLATFORM:
    PCIE_IPROC_PLATFORM=y causes CONFIG_PCIE_IPROC_PLATFORM to be defined, but
    PCIE_IPROC_PLATFORM=m causes CONFIG_PCIE_IPROC_PLATFORM_MODULE to be
    defined.

    Move quirk_paxc_bridge() to pcie-iproc.c and drop the #ifdef so the quirk
    is always applied, whether iproc is built-in or a module.

    [bhelgaas: commit log, move to pcie-iproc.c, not pcie-iproc-platform.c]
    Link: https://lore.kernel.org/r/20191211174511.89713-1-wei.liu@kernel.org
    Signed-off-by: Wei Liu <wei.liu@kernel.org>
    Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    drivers/pci/controller/pcie-iproc.c | 24 ++++++++++++++++++++++++
    drivers/pci/quirks.c | 26 --------------------------
    2 files changed, 24 insertions(+), 26 deletions(-)

    diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
    index 0a468c73bae38..8c7f875acf7fa 100644
    --- a/drivers/pci/controller/pcie-iproc.c
    +++ b/drivers/pci/controller/pcie-iproc.c
    @@ -1588,6 +1588,30 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802,
    DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804,
    quirk_paxc_disable_msi_parsing);

    +static void quirk_paxc_bridge(struct pci_dev *pdev)
    +{
    + /*
    + * The PCI config space is shared with the PAXC root port and the first
    + * Ethernet device. So, we need to workaround this by telling the PCI
    + * code that the bridge is not an Ethernet device.
    + */
    + if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
    + pdev->class = PCI_CLASS_BRIDGE_PCI << 8;
    +
    + /*
    + * MPSS is not being set properly (as it is currently 0). This is
    + * because that area of the PCI config space is hard coded to zero, and
    + * is not modifiable by firmware. Set this to 2 (e.g., 512 byte MPS)
    + * so that the MPS can be set to the real max value.
    + */
    + pdev->pcie_mpss = 2;
    +}
    +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge);
    +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge);
    +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd750, quirk_paxc_bridge);
    +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, quirk_paxc_bridge);
    +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_bridge);
    +
    MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
    MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
    MODULE_LICENSE("GPL v2");
    diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
    index fbeb9f73ef280..5cd6a77ddefff 100644
    --- a/drivers/pci/quirks.c
    +++ b/drivers/pci/quirks.c
    @@ -2381,32 +2381,6 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM,
    PCI_DEVICE_ID_TIGON3_5719,
    quirk_brcm_5719_limit_mrrs);

    -#ifdef CONFIG_PCIE_IPROC_PLATFORM
    -static void quirk_paxc_bridge(struct pci_dev *pdev)
    -{
    - /*
    - * The PCI config space is shared with the PAXC root port and the first
    - * Ethernet device. So, we need to workaround this by telling the PCI
    - * code that the bridge is not an Ethernet device.
    - */
    - if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
    - pdev->class = PCI_CLASS_BRIDGE_PCI << 8;
    -
    - /*
    - * MPSS is not being set properly (as it is currently 0). This is
    - * because that area of the PCI config space is hard coded to zero, and
    - * is not modifiable by firmware. Set this to 2 (e.g., 512 byte MPS)
    - * so that the MPS can be set to the real max value.
    - */
    - pdev->pcie_mpss = 2;
    -}
    -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge);
    -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge);
    -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd750, quirk_paxc_bridge);
    -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd802, quirk_paxc_bridge);
    -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0xd804, quirk_paxc_bridge);
    -#endif
    -
    /*
    * Originally in EDAC sources for i82875P: Intel tells BIOS developers to
    * hide device 6 which configures the overflow device access containing the
    --
    2.20.1
    \
     
     \ /
      Last update: 2020-02-14 16:53    [W:2.272 / U:0.344 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site