lkml.org 
[lkml]   [2020]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.5 198/542] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3
Date
From: Andrey Smirnov <andrew.smirnov@gmail.com>

[ Upstream commit cd58a174e58649426fb43d7456e5f7d7eab58af1 ]

RDU2 production units come with resistor connecting WP pin to
correpsonding GPIO DNPed for both SD card slots. Drop any WP related
configuration and mark both slots with "disable-wp".

Reported-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index a2a4f33a3e3ef..4ec9fb332610e 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -629,7 +629,7 @@
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ disable-wp;
vmmc-supply = <&reg_3p3v_sd>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
@@ -642,7 +642,7 @@
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
- wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ disable-wp;
vmmc-supply = <&reg_3p3v_sd>;
vqmmc-supply = <&reg_3p3v>;
no-1-8-v;
@@ -1056,7 +1056,6 @@
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x40010040
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x40010040
>;
};
@@ -1069,7 +1068,6 @@
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x40010040
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x40010040

>;
--
2.20.1
\
 
 \ /
  Last update: 2020-02-14 16:53    [W:1.573 / U:2.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site