lkml.org 
[lkml]   [2020]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/4] thermal: k3: Add support for bandgap sensors
Date
Add VTM thermal support. In the Voltage Thermal
Management Module(VTM), K3 AM654 supplies a voltage
reference and a temperature sensor feature that are gathered in the band
gap voltage and temperature sensor (VBGAPTS) module. The band
gap provides current and voltage reference for its internal
circuits and other analog IP blocks. The analog-to-digital
converter (ADC) produces an output value that is proportional
to the silicon temperature.

Add support for bandgap sensors. Currently reading temperatures
and trend computing is supported.

Changes in v2:

* Fixed yaml errors
* renamed am654-industrial-thermal.dtsi to k3-am654-industrial-thermal.dtsi
to follow the convention for k3 family.

Keerthy (4):
dt-bindings: thermal: k3: Add VTM bindings documentation
thermal: k3: Add support for bandgap sensors
arm64: dts: ti: am654: Add thermal zones
arm64: dts: ti: am6: Add VTM node

.../bindings/thermal/ti,am654-thermal.yaml | 57 +++
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 11 +
.../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++
drivers/thermal/Kconfig | 12 +
drivers/thermal/Makefile | 1 +
drivers/thermal/k3_bandgap.c | 342 ++++++++++++++++++
6 files changed, 468 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
create mode 100644 drivers/thermal/k3_bandgap.c

--
2.17.1

\
 
 \ /
  Last update: 2020-02-14 07:35    [W:0.060 / U:4.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site