lkml.org 
[lkml]   [2020]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 2/2] ARM: dts: n900: remove mmc1 card detect gpio
Date
Instead, expose the key via the input framework, as SW_MACHINE_COVER
---
arch/arm/boot/dts/omap3-n900.dts | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 7028a7cb2849..ed773e1609a5 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -108,6 +108,14 @@
linux,code = <SW_FRONT_PROXIMITY>;
linux,can-disable;
};
+
+ machine_cover {
+ label = "Machine Cover";
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MACHINE_COVER>;
+ linux,can-disable;
+ };
};

isp1707: isp1707 {
@@ -805,10 +813,6 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
- /* For debugging, it is often good idea to remove this GPIO.
- It means you can remove back cover (to reboot by removing
- battery) and still use the MMC card. */
- cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
};

/* most boards use vaux3, only some old versions use vmmc2 instead */
--
2.23.0
\
 
 \ /
  Last update: 2020-02-14 14:02    [W:0.069 / U:1.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site