lkml.org 
[lkml]   [2020]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH AUTOSEL 5.5 218/542] ARM: OMAP2+: Add workaround for DRA7 DSP MStandby errata i879
From
Date
Hi Sasha,

On 2/14/20 9:43 AM, Sasha Levin wrote:
> From: Suman Anna <s-anna@ti.com>
>
> [ Upstream commit 2f14101a1d760db72393910d481fbf7768c44530 ]
>
> Errata Title:
> i879: DSP MStandby requires CD_EMU in SW_WKUP
>
> Description:
> The DSP requires the internal emulation clock to be actively toggling
> in order to successfully enter a low power mode via execution of the
> IDLE instruction and PRCM MStandby/Idle handshake. This assumes that
> other prerequisites and software sequence are followed.
>
> Workaround:
> The emulation clock to the DSP is free-running anytime CCS is connected
> via JTAG debugger to the DSP subsystem or when the CD_EMU clock domain
> is set in SW_WKUP mode. The CD_EMU domain can be set in SW_WKUP mode
> via the CM_EMU_CLKSTCTRL [1:0]CLKTRCTRL field.
>
> Implementation:
> This patch implements this workaround by denying the HW_AUTO mode
> for the EMU clockdomain during the power-up of any DSP processor
> and re-enabling the HW_AUTO mode during the shutdown of the last
> DSP processor (actually done during the enabling and disabling of
> the respective DSP MDMA MMUs). Reference counting has to be used to
> manage the independent sequencing between the multiple DSP processors.
>
> This switching is done at runtime rather than a static clockdomain
> flags value to meet the target power domain state for the EMU power
> domain during suspend.
>
> Note that the DSP MStandby behavior is not consistent across all
> boards prior to this fix. Please see commit 45f871eec6c0 ("ARM:
> OMAP2+: Extend DRA7 IPU1 MMU pdata quirks to DSP MDMA MMUs") for
> details.
>
> Signed-off-by: Suman Anna <s-anna@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

You can drop this from the 5.5-stable queue. Mainline doesn't yet boot
the processors, so this is not needed for stable queue.

regards
Suman

> ---
> arch/arm/mach-omap2/omap-iommu.c | 43 +++++++++++++++++++++++++++++---
> 1 file changed, 40 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
> index f1a6ece8108e4..78247e6f4a720 100644
> --- a/arch/arm/mach-omap2/omap-iommu.c
> +++ b/arch/arm/mach-omap2/omap-iommu.c
> @@ -11,14 +11,43 @@
>
> #include "omap_hwmod.h"
> #include "omap_device.h"
> +#include "clockdomain.h"
> #include "powerdomain.h"
>
> +static void omap_iommu_dra7_emu_swsup_config(struct platform_device *pdev,
> + bool enable)
> +{
> + static struct clockdomain *emu_clkdm;
> + static DEFINE_SPINLOCK(emu_lock);
> + static atomic_t count;
> + struct device_node *np = pdev->dev.of_node;
> +
> + if (!of_device_is_compatible(np, "ti,dra7-dsp-iommu"))
> + return;
> +
> + if (!emu_clkdm) {
> + emu_clkdm = clkdm_lookup("emu_clkdm");
> + if (WARN_ON_ONCE(!emu_clkdm))
> + return;
> + }
> +
> + spin_lock(&emu_lock);
> +
> + if (enable && (atomic_inc_return(&count) == 1))
> + clkdm_deny_idle(emu_clkdm);
> + else if (!enable && (atomic_dec_return(&count) == 0))
> + clkdm_allow_idle(emu_clkdm);
> +
> + spin_unlock(&emu_lock);
> +}
> +
> int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
> u8 *pwrst)
> {
> struct powerdomain *pwrdm;
> struct omap_device *od;
> u8 next_pwrst;
> + int ret = 0;
>
> od = to_omap_device(pdev);
> if (!od)
> @@ -31,13 +60,21 @@ int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
> if (!pwrdm)
> return -EINVAL;
>
> - if (request)
> + if (request) {
> *pwrst = pwrdm_read_next_pwrst(pwrdm);
> + omap_iommu_dra7_emu_swsup_config(pdev, true);
> + }
>
> if (*pwrst > PWRDM_POWER_RET)
> - return 0;
> + goto out;
>
> next_pwrst = request ? PWRDM_POWER_ON : *pwrst;
>
> - return pwrdm_set_next_pwrst(pwrdm, next_pwrst);
> + ret = pwrdm_set_next_pwrst(pwrdm, next_pwrst);
> +
> +out:
> + if (!request)
> + omap_iommu_dra7_emu_swsup_config(pdev, false);
> +
> + return ret;
> }
>

\
 
 \ /
  Last update: 2020-02-14 19:36    [W:1.310 / U:13.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site