lkml.org 
[lkml]   [2020]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.5 057/542] arm64: dts: marvell: clearfog-gt-8k: fix switch cpu port node
Date
From: Baruch Siach <baruch@tkos.co.il>

[ Upstream commit 62bba54d99407aedfe9b0a02e72e23c06e2b0116 ]

Explicitly set the switch cpu (upstream) port phy-mode and managed
properties. This fixes the Marvell 88E6141 switch serdes configuration
with the recently enabled phylink layer.

Fixes: a6120833272c ("arm64: dts: add support for SolidRun Clearfog GT 8K")
Reported-by: Denis Odintsov <d.odintsov@traviangames.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index bd881497b8729..a211a046b2f2f 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -408,6 +408,8 @@
reg = <5>;
label = "cpu";
ethernet = <&cp1_eth2>;
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
};
};

--
2.20.1
\
 
 \ /
  Last update: 2020-02-14 19:20    [W:1.691 / U:19.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site