lkml.org 
[lkml]   [2020]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.14 013/186] pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs
Date
From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 55b1cb1f03ad5eea39897d0c74035e02deddcff2 ]

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
two CAN outputs.

Fix this by:
- Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010
configures the combined "CTX0&CTX1" output signal,
- Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures
the shared "CRX0/CRX1" input signal, which is fed to both CAN
inputs,
- Adding the missing function GPIO definition for "CTX0&CTX1" to
pinmux_func_gpios[],
- Moving all CAN enums next to each other.

See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00:
[1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte
Version),
[2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte
Version,
[3] Table 1.4 List of Pins,
[4] Figure 20.29 Connection Example when Using This Module as 1-Channel
Module (64 Mailboxes x 1 Channel),
[5] Table 32.10 Multiplexed Pins (Port J),
[6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0).

Note that the last 2 disagree about PJ2MD[2:0], which is probably the
root cause of this bug. But considering [4], "CTx0&CTx1" in [5] must
be correct, and "CRx0&CRx1" in [6] must be wrong.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/sh-pfc/pfc-sh7264.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7264.c b/drivers/pinctrl/sh-pfc/pfc-sh7264.c
index e1c34e19222ee..3ddb9565ed804 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7264.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7264.c
@@ -500,17 +500,15 @@ enum {
SD_WP_MARK, SD_CLK_MARK, SD_CMD_MARK,
CRX0_MARK, CRX1_MARK,
CTX0_MARK, CTX1_MARK,
+ CRX0_CRX1_MARK, CTX0_CTX1_MARK,

PWM1A_MARK, PWM1B_MARK, PWM1C_MARK, PWM1D_MARK,
PWM1E_MARK, PWM1F_MARK, PWM1G_MARK, PWM1H_MARK,
PWM2A_MARK, PWM2B_MARK, PWM2C_MARK, PWM2D_MARK,
PWM2E_MARK, PWM2F_MARK, PWM2G_MARK, PWM2H_MARK,
IERXD_MARK, IETXD_MARK,
- CRX0_CRX1_MARK,
WDTOVF_MARK,

- CRX0X1_MARK,
-
/* DMAC */
TEND0_MARK, DACK0_MARK, DREQ0_MARK,
TEND1_MARK, DACK1_MARK, DREQ1_MARK,
@@ -998,12 +996,12 @@ static const u16 pinmux_data[] = {

PINMUX_DATA(PJ3_DATA, PJ3MD_00),
PINMUX_DATA(CRX1_MARK, PJ3MD_01),
- PINMUX_DATA(CRX0X1_MARK, PJ3MD_10),
+ PINMUX_DATA(CRX0_CRX1_MARK, PJ3MD_10),
PINMUX_DATA(IRQ1_PJ_MARK, PJ3MD_11),

PINMUX_DATA(PJ2_DATA, PJ2MD_000),
PINMUX_DATA(CTX1_MARK, PJ2MD_001),
- PINMUX_DATA(CRX0_CRX1_MARK, PJ2MD_010),
+ PINMUX_DATA(CTX0_CTX1_MARK, PJ2MD_010),
PINMUX_DATA(CS2_MARK, PJ2MD_011),
PINMUX_DATA(SCK0_MARK, PJ2MD_100),
PINMUX_DATA(LCD_M_DISP_MARK, PJ2MD_101),
@@ -1248,6 +1246,7 @@ static const struct pinmux_func pinmux_func_gpios[] = {
GPIO_FN(CTX1),
GPIO_FN(CRX1),
GPIO_FN(CTX0),
+ GPIO_FN(CTX0_CTX1),
GPIO_FN(CRX0),
GPIO_FN(CRX0_CRX1),

--
2.20.1
\
 
 \ /
  Last update: 2020-02-14 17:59    [W:0.431 / U:6.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site