lkml.org 
[lkml]   [2020]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 19/52] spi: spi-mem: Fix inverted logic in op sanity check
Date
From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit aea3877e24f3acc6145094848dbb85f9ce85674a ]

On r8a7791/koelsch:

m25p80 spi0.0: error -22 reading 9f
m25p80: probe of spi0.0 failed with error -22

Apparently the logic in spi_mem_check_op() is wrong, rejecting the
spi-mem operation if any buswidth is valid, instead of invalid.

Fixes: 380583227c0c7f52 ("spi: spi-mem: Add extra sanity checks on the op param")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-mem.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index cc3d425aae56c..62a7b80801d22 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -169,10 +169,10 @@ static int spi_mem_check_op(const struct spi_mem_op *op)
(op->data.nbytes && !op->data.buswidth))
return -EINVAL;

- if (spi_mem_buswidth_is_valid(op->cmd.buswidth) ||
- spi_mem_buswidth_is_valid(op->addr.buswidth) ||
- spi_mem_buswidth_is_valid(op->dummy.buswidth) ||
- spi_mem_buswidth_is_valid(op->data.buswidth))
+ if (!spi_mem_buswidth_is_valid(op->cmd.buswidth) ||
+ !spi_mem_buswidth_is_valid(op->addr.buswidth) ||
+ !spi_mem_buswidth_is_valid(op->dummy.buswidth) ||
+ !spi_mem_buswidth_is_valid(op->data.buswidth))
return -EINVAL;

return 0;
--
2.20.1


\
 
 \ /
  Last update: 2020-02-13 16:50    [W:0.155 / U:9.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site