lkml.org 
[lkml]   [2020]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 04/96] IB/srp: Never use immediate data if it is disabled by a user
Date
From: Sergey Gorenko <sergeygo@mellanox.com>

commit 0fbb37dd82998b5c83355997b3bdba2806968ac7 upstream.

Some SRP targets that do not support specification SRP-2, put the garbage
to the reserved bits of the SRP login response. The problem was not
detected for a long time because the SRP initiator ignored those bits. But
now one of them is used as SRP_LOGIN_RSP_IMMED_SUPP. And it causes a
critical error on the target when the initiator sends immediate data.

The ib_srp module has a use_imm_date parameter to enable or disable
immediate data manually. But it does not help in the above case, because
use_imm_date is ignored at handling the SRP login response. The problem is
definitely caused by a bug on the target side, but the initiator's
behavior also does not look correct. The initiator should not use
immediate data if use_imm_date is disabled by a user.

This commit adds an additional checking of use_imm_date at the handling of
SRP login response to avoid unexpected use of immediate data.

Fixes: 882981f4a411 ("RDMA/srp: Add support for immediate data")
Link: https://lore.kernel.org/r/20200115133055.30232-1-sergeygo@mellanox.com
Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/infiniband/ulp/srp/ib_srp.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -2536,7 +2536,8 @@ static void srp_cm_rep_handler(struct ib
if (lrsp->opcode == SRP_LOGIN_RSP) {
ch->max_ti_iu_len = be32_to_cpu(lrsp->max_ti_iu_len);
ch->req_lim = be32_to_cpu(lrsp->req_lim_delta);
- ch->use_imm_data = lrsp->rsp_flags & SRP_LOGIN_RSP_IMMED_SUPP;
+ ch->use_imm_data = srp_use_imm_data &&
+ (lrsp->rsp_flags & SRP_LOGIN_RSP_IMMED_SUPP);
ch->max_it_iu_len = srp_max_it_iu_len(target->cmd_sg_cnt,
ch->use_imm_data);
WARN_ON_ONCE(ch->max_it_iu_len >

\
 
 \ /
  Last update: 2020-02-13 16:48    [W:0.183 / U:18.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site