lkml.org 
[lkml]   [2020]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 42/96] arm64: dts: uDPU: fix broken ethernet
Date
From: Russell King <rmk+kernel@armlinux.org.uk>

commit 1eebac0240580b531954b02c05068051df41142a upstream.

The uDPU uses both ethernet controllers, which ties up COMPHY 0 for
eth1 and COMPHY 1 for eth0, with no USB3 comphy. The addition of
COMPHY support made the kernel override the setup by the boot loader
breaking this platform by assuming that COMPHY 0 was always used for
USB3. Delete the USB3 COMPHY definition at platform level, and add
phy specifications for the ethernet channels.

Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 4 ++++
1 file changed, 4 insertions(+)

--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -143,6 +143,7 @@
phy-mode = "sgmii";
status = "okay";
managed = "in-band-status";
+ phys = <&comphy1 0>;
sfp = <&sfp_eth0>;
};

@@ -150,11 +151,14 @@
phy-mode = "sgmii";
status = "okay";
managed = "in-band-status";
+ phys = <&comphy0 1>;
sfp = <&sfp_eth1>;
};

&usb3 {
status = "okay";
+ phys = <&usb2_utmi_otg_phy>;
+ phy-names = "usb2-utmi-otg-phy";
};

&uart0 {

\
 
 \ /
  Last update: 2020-02-13 16:37    [W:0.226 / U:2.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site