lkml.org 
[lkml]   [2020]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 12/12] ARM: dts: imx7d: sbc-iot-imx7: add basic board support
On Fri, Jan 31, 2020 at 08:36:38AM +0000, André Draszik wrote:
> This is a forward-port of Compulab's downstream commit
> against linux 4.9.11, including updates to work with
> more recent kernels.
>
> Original commit message:
> The SB-IOT-iMX7 base board together with CL-SOM-iMX7
> SoM forms SBC-IOT-iMX7 single board computer.
> SBC-IOT-iMX7 is a single board computer optimized for
> industrial control and monitoring, extensive wireless
> and wired connectivity, ideal solution for
> cost-sensitive systems. It is based on the Freescale
> i.MX7 system-on-chip. SBC-IOT-iMX7 is implemented with
> the CL-SOM-iMX7 System-on-Module providing most of the
> functions,and SB-IOT-iMX7 carrier board providing
> additional peripheral functions and connectors.
>
> https://www.compulab.com/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/
> https://www.compulab.com/products/sbcs/sbc-iot-imx7-nxp-i-mx-7-internet-of-things-single-board-computer/
>
> This commit adds basic board support, including:
> * SD-card (note that write-protect is not connected
> on this carrier board)
> * SPI (available on expansion header)
> * i2c3 & i2c4 (including bus recovery information)
> * additional UARTs
> * all USB ports
> * SNVS powerkey
>
> Compared to the downtream commit, this commit doesn't
> add / enable the PCIe and LCD interface, as PCIe
> support needs an additional patch to the PCI controller
> first, and I can't test the LCD.
>
> Signed-off-by: André Draszik <git@andred.net>
> Cc: Ilya Ledvich <ilya@compulab.co.il>
> Cc: Igor Grinberg <grinberg@compulab.co.il>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
>
> ---
> v3:
> * enable snvs_pwrkey node
>
> v2:
> * use standard uart-has-rtscts instead of fsl,uart-has-rtscts
>
> ARM: dts: imx7d: sbc-iot-imx7: has a power key
>
> Signed-off-by: André Draszik <git@andred.net>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts | 202 +++++++++++++++++++++++
> 2 files changed, 203 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 08011dc8c7a6..6efbfa613366 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -603,6 +603,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
> imx7d-pico-hobbit.dtb \
> imx7d-pico-pi.dtb \
> imx7d-sbc-imx7.dtb \
> + imx7d-sbc-iot-imx7.dtb \
> imx7d-sdb.dtb \
> imx7d-sdb-reva.dtb \
> imx7d-sdb-sht11.dtb \
> diff --git a/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
> new file mode 100644
> index 000000000000..4ffa67f2e530
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
> @@ -0,0 +1,202 @@
> +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> +//
> +// Copyright 2017 CompuLab Ltd. - http://www.compulab.co.il/
> +/*
> + * Support for CompuLab SBC-IOT-iMX7 Single Board Computer
> + */
> +
> +#include "imx7d-cl-som-imx7.dts"
> +
> +/ {
> + model = "CompuLab,SBC-IOT-iMX7";
> + compatible = "compulab,sbc-iot-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
Any new compatibles need to be documented.

> +
> + reg_usb_vbus: regulator-usb-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "usb_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +};
> +
> +&ecspi3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
> + cs-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + pinctrl-1 = <&pinctrl_i2c3_recovery>;
> + sda-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> + scl-gpios = <&gpio1 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + status = "okay";
> +};
> +
> +&i2c4 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default", "gpio";
> + pinctrl-0 = <&pinctrl_i2c4>;
> + pinctrl-1 = <&pinctrl_i2c4_recovery>;
> + sda-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
> + scl-gpios = <&gpio1 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + status = "okay";
> +
> + eeprom_iot@54 {

The '_iot' in the node name doesn't make a lot sense.

> + compatible = "atmel,24c08";
> + reg = <0x54>;
> + pagesize = <16>;
> + };
> +};
> +
> +&snvs_pwrkey {

Keep the node sort alphabetically.

Shawn

> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl-1 = <&pinctrl_xpen>;
> +
> + /* SB-IOT-iMX7 Xpension Header P7 */
> + pinctrl_xpen: xpengrp {
> + fsl,pins = <
> + MX7D_PAD_LCD_DATA13__GPIO3_IO18 0x34 /* P7-4 - gpio82 */
> + MX7D_PAD_LCD_DATA12__GPIO3_IO17 0x34 /* P7-5 - gpio81 */
> + >;
> + };
> +
> + pinctrl_ecspi3: ecspi3grp {
> + fsl,pins = <
> + MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0xf /* P7-7 */
> + MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0xf /* P7-8 */
> + MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0xf /* P7-6 */
> + >;
> + };
> +
> + pinctrl_ecspi3_cs: ecspi3_cs_grp {
> + fsl,pins = <
> + MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x34 /* P7-9 */
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO09__I2C3_SDA 0x4000000f /* P7-3 */
> + MX7D_PAD_GPIO1_IO08__I2C3_SCL 0x4000000f /* P7-2 */
> + >;
> + };
> +
> + pinctrl_i2c3_recovery: i2c3recoverygrp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x4000000f /* P7-3 */
> + MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x4000000f /* P7-2 */
> + >;
> + };
> +
> + pinctrl_i2c4: i2c4grp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO11__I2C4_SDA 0x4000000f
> + MX7D_PAD_GPIO1_IO10__I2C4_SCL 0x4000000f
> + >;
> + };
> +
> + pinctrl_i2c4_recovery: i2c4recoverygrp {
> + fsl,pins = <
> + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x4000000f
> + MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x4000000f
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX7D_PAD_LCD_ENABLE__UART2_DCE_TX 0x79 /* P7-12 */
> + MX7D_PAD_LCD_CLK__UART2_DCE_RX 0x79 /* P7-13 */
> + MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS 0x79 /* P7-11 */
> + MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS 0x79 /* P7-10 */
> + >;
> + };
> +
> + pinctrl_uart5: uart5grp {
> + fsl,pins = <
> + MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 /* RS232-TX */
> + MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 /* RS232-RX */
> + MX7D_PAD_I2C3_SDA__UART5_DCE_RTS 0x79 /* RS232-RTS */
> + MX7D_PAD_I2C3_SCL__UART5_DCE_CTS 0x79 /* RS232-CTS */
> + >;
> + };
> +
> + pinctrl_uart7: uart7grp {
> + fsl,pins = <
> + MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX 0x79 /* R485-TX */
> + MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX 0x79 /* R485-RX */
> + MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS 0x79 /* R485-CTS */
> + MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS 0x79 /* R485-TTS */
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX7D_PAD_SD1_CMD__SD1_CMD 0x59
> + MX7D_PAD_SD1_CLK__SD1_CLK 0x19
> + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
> + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
> + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
> + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
> + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
> + >;
> + };
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart2>;
> + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&uart5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart5>;
> + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&uart7 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart7>;
> + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> + uart-has-rtscts;
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + vbus-supply = <&reg_usb_vbus>;
> + status = "okay";
> +};
> +
> +&usbotg2 {
> + dr_mode = "host";
> + vbus-supply = <&reg_usb_vbus>;
> + status = "okay";
> +};
> +
> +&usbh {
> + vbus-supply = <&reg_usb_vbus>;
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> + wakeup-source;
> + status = "okay";
> +};
> --
> 2.23.0.rc1
>

\
 
 \ /
  Last update: 2020-02-14 04:30    [W:0.073 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site