lkml.org 
[lkml]   [2020]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm64: dts: imx8mq-librem5-devkit: Add proximity sensor
On Mon, Jan 20, 2020 at 05:12:55PM +0100, Guido Günther wrote:
> Support for the vcnl4040 landet a while ago so add it and the
> corresponding pinmux. The irq is currently unused in the driver so don't
> configure it yet.
>
> Signed-off-by: Guido Günther <agx@sigxcpu.org>
> ---
> .../boot/dts/freescale/imx8mq-librem5-devkit.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> index c8627f6614ae..b87c2e39b16c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
> @@ -448,6 +448,12 @@
> VDDIO-supply = <&reg_1v8_p>;
> };
>
> + prox@60 {

I changed node name to proximity-sensor and applied the patch.

Shawn

> + compatible = "vishay,vcnl4040";
> + reg = <0x60>;
> + pinctrl-0 = <&pinctrl_prox>;
> + };
> +
> accel-gyro@6a {
> compatible = "st,lsm9ds1-imu";
> reg = <0x6a>;
> @@ -550,6 +556,12 @@
> >;
> };
>
> + pinctrl_prox: proxgrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x80 /* prox intr */
> + >;
> + };
> +
> pinctrl_pwr_en: pwrengrp {
> fsl,pins = <
> MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x06
> --
> 2.23.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2020-02-14 03:25    [W:0.038 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site