lkml.org 
[lkml]   [2020]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] ARM: sun7i: dts: Add LVDS panel support on A20
On Thu, Feb 13, 2020 at 10:43:04AM +0100, Maxime Ripard wrote:
> On Thu, Feb 13, 2020 at 12:23:57AM +0200, andrey.lebedev@gmail.com wrote:
> > From: Andrey Lebedev <andrey@lebedev.lt>
> >
> > Define pins for LVDS channels 0 and 1, configure reset line for tcon0 and
> > provide sample LVDS panel, connected to tcon0.
> >
> > Signed-off-by: Andrey Lebedev <andrey@lebedev.lt>
>
> And this prefix should be ARM: dts: sun7i ;)

Ah, thanks, I think I've got the pattern now!

> > + /omit-if-no-ref/
> > + lcd_lvds0_pins: lcd_lvds0_pins {
>
> underscores in the node names will create a dtc warning at
> compilation, you should use lcd-lvds0-pins instead.

You're right, I wasn't following the naming convention here. dtc doesn't
produce any warning on this though. Fixed that anyway.

> This will create a spurious warning message for TCON1, since we
> adjusted the driver to tell it supports LVDS, but there's no LVDS
> reset line, so we need to make it finer grained.

Yes, I can attribute two of the messages in my dmesg log [1] to this
("Missing LVDS properties" and "LVDS output disabled". "sun4i-tcon
1c0d000.lcd-controller" is indeed tcon1). And yes, I can see how they
can be confusing to someone.

I'd need some pointers on how to deal with that though (if we want to do
it in this scope).

[1] excerpt from kernel boot log:

[ 4.890975] sun4i-drm display-engine: bound 1e00000.display-frontend (ops sun4i_frontend_driver_exit [sun4i_frontend])
[ 4.902032] sun4i-drm display-engine: bound 1e20000.display-frontend (ops sun4i_frontend_driver_exit [sun4i_frontend])
[ 4.913467] sun4i-drm display-engine: bound 1e60000.display-backend (ops sun4i_backend_ops [sun4i_backend])
[ 4.923806] sun4i-drm display-engine: bound 1e40000.display-backend (ops sun4i_backend_ops [sun4i_backend])
[ 4.934451] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon])
[ 4.945254] sun4i-tcon 1c0d000.lcd-controller: Missing LVDS properties, Please upgrade your DT
[ 4.953935] sun4i-tcon 1c0d000.lcd-controller: LVDS output disabled
[ 4.960857] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
[ 4.968845] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon])
[ 5.080874] sun4i-drm display-engine: bound 1c16000.hdmi (ops sun4i_hdmi_driver_exit [sun4i_drm_hdmi])
[ 5.110087] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[ 5.763064] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device


--
Andrey Lebedev aka -.- . -.. -.. . .-.
Software engineer
Homepage: http://lebedev.lt/

\
 
 \ /
  Last update: 2020-02-13 21:09    [W:0.086 / U:7.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site