lkml.org 
[lkml]   [2020]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 15/28] x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*()
On Wed, Feb 12, 2020 at 12:10:00AM +0100, Rafael J. Wysocki wrote:
> From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
>
> Call cpu_latency_qos_add/update/remove_request() instead of
> pm_qos_add/update/remove_request(), respectively, because the
> latter are going to be dropped.
>
> No intentional functional impact.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> arch/x86/platform/intel/iosf_mbi.c | 13 ++++++-------
> 1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/arch/x86/platform/intel/iosf_mbi.c b/arch/x86/platform/intel/iosf_mbi.c
> index 9e2444500428..526f70f27c1c 100644
> --- a/arch/x86/platform/intel/iosf_mbi.c
> +++ b/arch/x86/platform/intel/iosf_mbi.c
> @@ -265,7 +265,7 @@ static void iosf_mbi_reset_semaphore(void)
> iosf_mbi_sem_address, 0, PUNIT_SEMAPHORE_BIT))
> dev_err(&mbi_pdev->dev, "Error P-Unit semaphore reset failed\n");
>
> - pm_qos_update_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);
> + cpu_latency_qos_update_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);
>
> blocking_notifier_call_chain(&iosf_mbi_pmic_bus_access_notifier,
> MBI_PMIC_BUS_ACCESS_END, NULL);
> @@ -301,8 +301,8 @@ static void iosf_mbi_reset_semaphore(void)
> * 4) When CPU cores enter C6 or C7 the P-Unit needs to talk to the PMIC
> * if this happens while the kernel itself is accessing the PMIC I2C bus
> * the SoC hangs.
> - * As the third step we call pm_qos_update_request() to disallow the CPU
> - * to enter C6 or C7.
> + * As the third step we call cpu_latency_qos_update_request() to disallow the
> + * CPU to enter C6 or C7.
> *
> * 5) The P-Unit has a PMIC bus semaphore which we can request to stop
> * autonomous P-Unit tasks from accessing the PMIC I2C bus while we hold it.
> @@ -338,7 +338,7 @@ int iosf_mbi_block_punit_i2c_access(void)
> * requires the P-Unit to talk to the PMIC and if this happens while
> * we're holding the semaphore, the SoC hangs.
> */
> - pm_qos_update_request(&iosf_mbi_pm_qos, 0);
> + cpu_latency_qos_update_request(&iosf_mbi_pm_qos, 0);
>
> /* host driver writes to side band semaphore register */
> ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
> @@ -547,8 +547,7 @@ static int __init iosf_mbi_init(void)
> {
> iosf_debugfs_init();
>
> - pm_qos_add_request(&iosf_mbi_pm_qos, PM_QOS_CPU_DMA_LATENCY,
> - PM_QOS_DEFAULT_VALUE);
> + cpu_latency_qos_add_request(&iosf_mbi_pm_qos, PM_QOS_DEFAULT_VALUE);
>
> return pci_register_driver(&iosf_mbi_pci_driver);
> }
> @@ -561,7 +560,7 @@ static void __exit iosf_mbi_exit(void)
> pci_dev_put(mbi_pdev);
> mbi_pdev = NULL;
>
> - pm_qos_remove_request(&iosf_mbi_pm_qos);
> + cpu_latency_qos_remove_request(&iosf_mbi_pm_qos);
> }
>
> module_init(iosf_mbi_init);
> --
> 2.16.4
>
>
>
>
>

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2020-02-12 11:15    [W:0.177 / U:7.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site