lkml.org 
[lkml]   [2020]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ALSA: usb-audio: Apply sample rate quirk for Audioengine D1
Date
The Audioengine D1 (0x2912:0x30c8) does support reading the sample rate,
but it returns the rate in byte-reversed order.

When setting sampling rate, the driver produces these warning messages:
[168840.944226] usb 3-2.2: current rate 4500480 is different from the runtime rate 44100
[168854.930414] usb 3-2.2: current rate 8436480 is different from the runtime rate 48000
[168905.185825] usb 3-2.1.2: current rate 30465 is different from the runtime rate 96000

As can be seen from the hexadecimal conversion, the current rate read
back is byte-reversed from the rate that was set.

44100 == 0x00ac44, 4500480 == 0x44ac00
48000 == 0x00bb80, 8436480 == 0x80bb00
96000 == 0x017700, 30465 == 0x007701

Rather than implementing a new quirk to reverse the order, just skip
checking the rate to avoid spamming the log.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
---
sound/usb/quirks.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 3a5242e383b2..7f558f4b4520 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1440,6 +1440,7 @@ bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip)
case USB_ID(0x1395, 0x740a): /* Sennheiser DECT */
case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */
case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
+ case USB_ID(0x2912, 0x30c8): /* Audioengine D1 */
return true;
}

--
2.24.1
\
 
 \ /
  Last update: 2020-02-11 17:23    [W:0.025 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site