lkml.org 
[lkml]   [2020]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] serial: sh-sci: Support custom speed setting
Hi Greg,

CC man

On Mon, Feb 10, 2020 at 9:57 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> On Thu, Jan 30, 2020 at 01:32:50PM +0100, Geert Uytterhoeven wrote:
> > On Wed, Jan 29, 2020 at 5:20 PM Eugeniu Rosca <erosca@de.adit-jv.com> wrote:
> > > From: Torii Kenichi <torii.ken1@jp.fujitsu.com>
> > >
> > > This patch is necessary to use BT module and XM module with DENSO TEN
> > > development board.
> > >
> > > This patch supports ASYNC_SPD_CUST flag by ioctl(TIOCSSERIAL), enables
> > > custom speed setting with setserial(1).
> > >
> > > The custom speed is calculated from uartclk and custom_divisor.
> > > If custom_divisor is zero, custom speed setting is invalid.
> > >
> > > Signed-off-by: Torii Kenichi <torii.ken1@jp.fujitsu.com>
> > > [erosca: rebase against v5.5]
> > > Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
> >
> > Thanks for your patch!
> >
> > While this seems to work fine[*], I have a few comments/questions:
> > 1. This feature seems to be deprecated:
> >
> > sh-sci e6e68000.serial: setserial sets custom speed on
> > ttySC1. This is deprecated.
> >
> > 2. As the wanted speed is specified as a divider, the resulting speed
> > may be off, cfr. the example for 57600 below.
> > Note that the SCIF device has multiple clock inputs, and can do
> > 57600 perfectly if the right crystal has been fitted.
> >
> > 3. What to do with "[PATCH/RFC] serial: sh-sci: Update uartclk based
> > on selected clock" (https://patchwork.kernel.org/patch/11103703/)?
> > Combined with this, things become pretty complicated and
> > unpredictable, as uartclk now always reflect the frequency of the
> > last used base clock, which was the optimal one for the previously
> > used speed....
> >
> > I think it would be easier if we just had an API to specify a raw speed.
> > Perhaps that already exists?
>
> Yes, see:
> http://www.panix.com/~grante/arbitrary-baud.c

Thanks a lot!!
This must be one of the most guarded secrets of serial port programming ;-)

Implemented since 2006, commit edc6afc5496875a6 ("[PATCH] tty: switch to
ktermios and new framework"), not documented in today's man-pages.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2020-02-11 09:15    [W:0.066 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site