lkml.org 
[lkml]   [2020]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip: perf/core] perf/x86/intel: Avoid unnecessary PEBS_ENABLE MSR access in PMI
The following commit has been merged into the perf/core branch of tip:

Commit-ID: 6c1c07b33eb093e5a2a313ece89baa596ba6135e
Gitweb: https://git.kernel.org/tip/6c1c07b33eb093e5a2a313ece89baa596ba6135e
Author: Kan Liang <kan.liang@linux.intel.com>
AuthorDate: Tue, 21 Jan 2020 10:13:38 -08:00
Committer: Ingo Molnar <mingo@kernel.org>
CommitterDate: Tue, 11 Feb 2020 13:23:48 +01:00

perf/x86/intel: Avoid unnecessary PEBS_ENABLE MSR access in PMI

The perf PMI handler, intel_pmu_handle_irq(), currently does
unnecessary MSR accesses for PEBS_ENABLE MSR in
__intel_pmu_enable/disable_all() when PEBS is enabled.

When entering the handler, global ctrl is explicitly disabled. All
counters do not count anymore. It doesn't matter if PEBS is enabled
or not in a PMI handler.
Furthermore, for most cases, the cpuc->pebs_enabled is not changed in
PMI. The PEBS status doesn't change. The PEBS_ENABLE MSR doesn't need to
be changed either when exiting the handler.

PMI throttle may change the PEBS status during PMI handler. The
x86_pmu_stop() ends up in intel_pmu_pebs_disable() which can update
cpuc->pebs_enabled. But the MSR_IA32_PEBS_ENABLE is not updated
at the same time. Because the cpuc->enabled has been forced to 0.
The patch explicitly update the MSR_IA32_PEBS_ENABLE for this case.

Use ftrace to measure the duration of intel_pmu_handle_irq() on BDX.
#perf record -e cycles:P -- ./tchain_edit

The average duration of intel_pmu_handle_irq():

Without the patch 1.144 us
With the patch 1.025 us

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200121181338.3234-1-kan.liang@linux.intel.com
---
arch/x86/events/intel/core.c | 25 ++++++++++++++++++++++---
1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index dff6623..332954c 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -1945,6 +1945,14 @@ static __initconst const u64 knl_hw_cache_extra_regs
* intel_bts events don't coexist with intel PMU's BTS events because of
* x86_add_exclusive(x86_lbr_exclusive_lbr); there's no need to keep them
* disabled around intel PMU's event batching etc, only inside the PMI handler.
+ *
+ * Avoid PEBS_ENABLE MSR access in PMIs.
+ * The GLOBAL_CTRL has been disabled. All the counters do not count anymore.
+ * It doesn't matter if the PEBS is enabled or not.
+ * Usually, the PEBS status are not changed in PMIs. It's unnecessary to
+ * access PEBS_ENABLE MSR in disable_all()/enable_all().
+ * However, there are some cases which may change PEBS status, e.g. PMI
+ * throttle. The PEBS_ENABLE should be updated where the status changes.
*/
static void __intel_pmu_disable_all(void)
{
@@ -1954,13 +1962,12 @@ static void __intel_pmu_disable_all(void)

if (test_bit(INTEL_PMC_IDX_FIXED_BTS, cpuc->active_mask))
intel_pmu_disable_bts();
-
- intel_pmu_pebs_disable_all();
}

static void intel_pmu_disable_all(void)
{
__intel_pmu_disable_all();
+ intel_pmu_pebs_disable_all();
intel_pmu_lbr_disable_all();
}

@@ -1968,7 +1975,6 @@ static void __intel_pmu_enable_all(int added, bool pmi)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);

- intel_pmu_pebs_enable_all();
intel_pmu_lbr_enable_all(pmi);
wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL,
x86_pmu.intel_ctrl & ~cpuc->intel_ctrl_guest_mask);
@@ -1986,6 +1992,7 @@ static void __intel_pmu_enable_all(int added, bool pmi)

static void intel_pmu_enable_all(int added)
{
+ intel_pmu_pebs_enable_all();
__intel_pmu_enable_all(added, false);
}

@@ -2374,9 +2381,21 @@ static int handle_pmi_common(struct pt_regs *regs, u64 status)
* PEBS overflow sets bit 62 in the global status register
*/
if (__test_and_clear_bit(62, (unsigned long *)&status)) {
+ u64 pebs_enabled = cpuc->pebs_enabled;
+
handled++;
x86_pmu.drain_pebs(regs);
status &= x86_pmu.intel_ctrl | GLOBAL_STATUS_TRACE_TOPAPMI;
+
+ /*
+ * PMI throttle may be triggered, which stops the PEBS event.
+ * Although cpuc->pebs_enabled is updated accordingly, the
+ * MSR_IA32_PEBS_ENABLE is not updated. Because the
+ * cpuc->enabled has been forced to 0 in PMI.
+ * Update the MSR if pebs_enabled is changed.
+ */
+ if (pebs_enabled != cpuc->pebs_enabled)
+ wrmsrl(MSR_IA32_PEBS_ENABLE, cpuc->pebs_enabled);
}

/*
\
 
 \ /
  Last update: 2020-02-11 13:49    [W:0.040 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site