lkml.org 
[lkml]   [2020]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [[PATCH staging] 6/7] staging: wfx: use sleeping gpio accessors
Date
On Tuesday 11 February 2020 09:46:55 CET Michał Mirosław wrote:
> Driver calls GPIO get/set only from non-atomic context and so can use any
> GPIOs.
>
> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
> ---
> drivers/staging/wfx/bh.c | 6 +++---
> drivers/staging/wfx/bus_spi.c | 4 ++--
> drivers/staging/wfx/main.c | 2 +-
> 3 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/staging/wfx/bh.c b/drivers/staging/wfx/bh.c
> index 983c41d1fe7c..c6319ab7e71a 100644
> --- a/drivers/staging/wfx/bh.c
> +++ b/drivers/staging/wfx/bh.c
> @@ -20,10 +20,10 @@ static void device_wakeup(struct wfx_dev *wdev)
> {
> if (!wdev->pdata.gpio_wakeup)
> return;
> - if (gpiod_get_value(wdev->pdata.gpio_wakeup))
> + if (gpiod_get_value_cansleep(wdev->pdata.gpio_wakeup))
> return;
>
> - gpiod_set_value(wdev->pdata.gpio_wakeup, 1);
> + gpiod_set_value_cansleep(wdev->pdata.gpio_wakeup, 1);
> if (wfx_api_older_than(wdev, 1, 4)) {
> if (!completion_done(&wdev->hif.ctrl_ready))
> udelay(2000);
> @@ -45,7 +45,7 @@ static void device_release(struct wfx_dev *wdev)
> if (!wdev->pdata.gpio_wakeup)
> return;
>
> - gpiod_set_value(wdev->pdata.gpio_wakeup, 0);
> + gpiod_set_value_cansleep(wdev->pdata.gpio_wakeup, 0);
> }
>
> static int rx_helper(struct wfx_dev *wdev, size_t read_len, int *is_cnf)
> diff --git a/drivers/staging/wfx/bus_spi.c b/drivers/staging/wfx/bus_spi.c
> index c5f78161234d..634b4e5bb055 100644
> --- a/drivers/staging/wfx/bus_spi.c
> +++ b/drivers/staging/wfx/bus_spi.c
> @@ -208,9 +208,9 @@ static int wfx_spi_probe(struct spi_device *func)
> } else {
> if (spi_get_device_id(func)->driver_data & WFX_RESET_INVERTED)
> gpiod_toggle_active_low(bus->gpio_reset);
> - gpiod_set_value(bus->gpio_reset, 1);
> + gpiod_set_value_cansleep(bus->gpio_reset, 1);
> udelay(100);
> - gpiod_set_value(bus->gpio_reset, 0);
> + gpiod_set_value_cansleep(bus->gpio_reset, 0);
> udelay(2000);
> }
>
> diff --git a/drivers/staging/wfx/main.c b/drivers/staging/wfx/main.c
> index 84adad64fc30..e8bdeb9aa3a9 100644
> --- a/drivers/staging/wfx/main.c
> +++ b/drivers/staging/wfx/main.c
> @@ -420,7 +420,7 @@ int wfx_probe(struct wfx_dev *wdev)
> "enable 'quiescent' power mode with gpio %d and PDS file %s\n",
> desc_to_gpio(wdev->pdata.gpio_wakeup),
> wdev->pdata.file_pds);
> - gpiod_set_value(wdev->pdata.gpio_wakeup, 1);
> + gpiod_set_value_cansleep(wdev->pdata.gpio_wakeup, 1);
> control_reg_write(wdev, 0);
> hif_set_operational_mode(wdev, HIF_OP_POWER_MODE_QUIESCENT);
> } else {
> --
> 2.20.1
>

Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>

--
Jérôme Pouiller

\
 
 \ /
  Last update: 2020-02-11 11:41    [W:0.034 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site