Messages in this thread Patch in this message | | | From | Bjorn Andersson <> | Subject | [PATCH v3 5/8] arm64: dts: qcom: sdm845: Add IMEM and PIL info region | Date | Mon, 10 Feb 2020 16:50:56 -0800 |
| |
Add a simple-mfd representing IMEM on SDM845 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteprocs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> ---
Changes since v2: - Replace offset with reg
arch/arm64/boot/dts/qcom/sdm845.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index d42302b8889b..3443d989976c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3018,6 +3018,19 @@ spmi_bus: spmi@c440000 { cell-index = <0>; }; + imem@146bf000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x146bf000 0 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible ="qcom,pil-reloc-info"; + reg = <0x94c 200>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x80000>; -- 2.24.0
| |