lkml.org 
[lkml]   [2020]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/3] UBI: Do not zero out EC and VID on ECC-ed NOR flashes
Richard,

On 01/12/20 03:57PM, Pratyush Yadav wrote:
> For NOR flashes EC and VID are zeroed out before an erase is issued to
> make sure UBI does not mistakenly treat the PEB as used and associate it
> with an LEB.
>
> But on some flashes, like the Cypress Semper S28 SPI NOR flash family,
> multi-pass page programming is not allowed on the default ECC scheme.
> This means zeroing out these magic numbers will result in the flash
> throwing a page programming error.
>
> Do not zero out EC and VID for such flashes. A writesize > 1 is an
> indication of an ECC-ed flash.

Patches 2/3 and 3/3 have been picked up in the spi-nor tree. Can you
please pick this patch up?

--
Regards,
Pratyush Yadav
Texas Instruments India

\
 
 \ /
  Last update: 2020-12-08 19:13    [W:1.359 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site