lkml.org 
[lkml]   [2020]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Regression] Can only do S3 once after "tpm: take TPM chip power gating out of tpm_transmit()"
On Mon, Dec 07, 2020 at 12:42:53PM +0800, Kai-Heng Feng wrote:
> Hi Jarkko,
>
> A user report that the system can only do S3 once. Subsequent S3 fails after commit a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()").
>
> Dmesg with the issue, collected under 5.10-rc2:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891502/comments/14
>
> Dmesg without the issue, collected under 5.0.0-rc8:
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891502/comments/16
>
> Full bug report here:
> https://bugs.launchpad.net/bugs/1891502
>
> Kai-Heng

Relevant part:


[80601.620149] tpm tpm0: Error (28) sending savestate before suspend
[80601.620165] PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x90 returns 28
[80601.620172] PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x20 returns 28
[80601.620178] PM: Device 00:01 failed to suspend: error 28

Looking at this there are two issues:

A. TPM_ORD_SAVESTATE command failing, this a new regression.
B. When tpm_pm_suspend() fails, it should not fail the whole suspend
procedure. And it returns the TPM error code back to the upper
layers when it does so, which makes no sense. This is an old
issue revealed by A.

Let's look at tpm_pm_suspend():

/*
* We are about to suspend. Save the TPM state
* so that it can be restored.
*/
int tpm_pm_suspend(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
int rc = 0;

if (!chip)
return -ENODEV;

if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
goto suspended;

if ((chip->flags & TPM_CHIP_FLAG_FIRMWARE_POWER_MANAGED) &&
!pm_suspend_via_firmware())
goto suspended;

if (!tpm_chip_start(chip)) {
if (chip->flags & TPM_CHIP_FLAG_TPM2)
tpm2_shutdown(chip, TPM2_SU_STATE);
else
rc = tpm1_pm_suspend(chip, tpm_suspend_pcr);

tpm_chip_stop(chip);
}

suspended:
return rc;
}
EXPORT_SYMBOL_GPL(tpm_pm_suspend);

I would modify this into:

/*
* We are about to suspend. Save the TPM state
* so that it can be restored.
*/
int tpm_pm_suspend(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
int rc = 0;

if (!chip)
return -ENODEV;

if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
goto suspended;

if ((chip->flags & TPM_CHIP_FLAG_FIRMWARE_POWER_MANAGED) &&
!pm_suspend_via_firmware())
goto suspended;

if (!tpm_chip_start(chip)) {
if (chip->flags & TPM_CHIP_FLAG_TPM2)
tpm2_shutdown(chip, TPM2_SU_STATE);
else
tpm1_pm_suspend(chip, tpm_suspend_pcr);

tpm_chip_stop(chip);
}

suspended:
return rc;
}
EXPORT_SYMBOL_GPL(tpm_pm_suspend);

I.e. it's a good idea to put something into klog but that should not
fail the whole suspend procedure. TPM is essentially opt-in feature.

Of course issue A needs to be also sorted out but would this work as
a quick initial fix? I can queue a patch for this. Is it possible to
try out this fix for if I drop a patch?

/Jarkko

\
 
 \ /
  Last update: 2020-12-08 11:19    [W:0.056 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site