lkml.org 
[lkml]   [2020]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: typec: intel_pmc_mux: Use correct response message bits
On Thu, Dec 03, 2020 at 02:08:13PM -0800, Utkarsh Patel wrote:
> When Intel PMC Mux agent driver receives the response message from PMC, it
> checks for the same response bits for all the mux states.
> Corrected it by checking correct response message bits, Bit 8 & 9 for the
> SAFE Mode and Alternate Modes and Bit 16 & 17 for the Connect and
> Disconnect Modes.
>
> Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
> drivers/usb/typec/mux/intel_pmc_mux.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
> index aa3211f1c4c3..e58ae8a7fefb 100644
> --- a/drivers/usb/typec/mux/intel_pmc_mux.c
> +++ b/drivers/usb/typec/mux/intel_pmc_mux.c
> @@ -176,6 +176,7 @@ static int hsl_orientation(struct pmc_usb_port *port)
> static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
> {
> u8 response[4];
> + u8 status_res;
> int ret;
>
> /*
> @@ -189,9 +190,13 @@ static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
> if (ret)
> return ret;
>
> - if (response[2] & PMC_USB_RESP_STATUS_FAILURE) {
> - if (response[2] & PMC_USB_RESP_STATUS_FATAL)
> + status_res = (msg[0] & 0xf) < PMC_USB_SAFE_MODE ?
> + response[2] : response[1];
> +
> + if (status_res & PMC_USB_RESP_STATUS_FAILURE) {
> + if (status_res & PMC_USB_RESP_STATUS_FATAL)
> return -EIO;
> +
> return -EBUSY;
> }
>
> --
> 2.17.1

thanks,

--
heikki

\
 
 \ /
  Last update: 2020-12-08 10:42    [W:0.145 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site