lkml.org 
[lkml]   [2020]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH v5 01/16] dt-bindings: dma: Add YAML schemas for dw-axi-dmac
Date
Hi Rob,

Regarding the comment " You don't need to use allOf with a $ref anymore."
I get dt compile error after remove the allOf and $ref. Error message shown below:
'$ref' is a required property
'allOf' is a required property

snps,dma-masters:
description: |
Number of AXI masters supported by the hardware.
enum: [1, 2]
default: 2

Thanks
Regards
Jee Heng

> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: 01 December 2020 6:26 AM
> To: Sia, Jee Heng <jee.heng.sia@intel.com>
> Cc: vkoul@kernel.org; Eugeniy.Paltsev@synopsys.com;
> andriy.shevchenko@linux.intel.com; dmaengine@vger.kernel.org;
> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> Subject: Re: [PATCH v5 01/16] dt-bindings: dma: Add YAML schemas
> for dw-axi-dmac
>
> On Mon, Nov 23, 2020 at 10:34:37AM +0800, Sia Jee Heng wrote:
> > YAML schemas Device Tree (DT) binding is the new format for DT to
> > replace the old format. Introduce YAML schemas DT binding for
> > dw-axi-dmac and remove the old version.
> >
> > Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
> > ---
> > .../bindings/dma/snps,dw-axi-dmac.txt | 39 ------
> > .../bindings/dma/snps,dw-axi-dmac.yaml | 126
> ++++++++++++++++++
> > 2 files changed, 126 insertions(+), 39 deletions(-) delete mode
> > 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-
> dmac.txt
> > create mode 100644
> > Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
> > b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
> > deleted file mode 100644
> > index dbe160400adc..000000000000
> > --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-
> dmac.txt
> > +++ /dev/null
> > @@ -1,39 +0,0 @@
> > -Synopsys DesignWare AXI DMA Controller
> > -
> > -Required properties:
> > -- compatible: "snps,axi-dma-1.01a"
> > -- reg: Address range of the DMAC registers. This should include
> > - all of the per-channel registers.
> > -- interrupt: Should contain the DMAC interrupt number.
> > -- dma-channels: Number of channels supported by hardware.
> > -- snps,dma-masters: Number of AXI masters supported by the
> hardware.
> > -- snps,data-width: Maximum AXI data width supported by hardware.
> > - (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
> > -- snps,priority: Priority of channel. Array size is equal to the
> > number of
> > - dma-channels. Priority value must be programmed within
> > [0:dma-channels-1]
> > - range. (0 - minimum priority)
> > -- snps,block-size: Maximum block size supported by the controller
> channel.
> > - Array size is equal to the number of dma-channels.
> > -
> > -Optional properties:
> > -- snps,axi-max-burst-len: Restrict master AXI burst length by value
> > specified
> > - in this property. If this property is missing the maximum AXI burst
> > length
> > - supported by DMAC is used. [1:256]
> > -
> > -Example:
> > -
> > -dmac: dma-controller@80000 {
> > - compatible = "snps,axi-dma-1.01a";
> > - reg = <0x80000 0x400>;
> > - clocks = <&core_clk>, <&cfgr_clk>;
> > - clock-names = "core-clk", "cfgr-clk";
> > - interrupt-parent = <&intc>;
> > - interrupts = <27>;
> > -
> > - dma-channels = <4>;
> > - snps,dma-masters = <2>;
> > - snps,data-width = <3>;
> > - snps,block-size = <4096 4096 4096 4096>;
> > - snps,priority = <0 1 2 3>;
> > - snps,axi-max-burst-len = <16>;
> > -};
> > diff --git
> > a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> > b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> > new file mode 100644
> > index 000000000000..6c2e8e612af5
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-
> dmac.yaml
> > @@ -0,0 +1,126 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML
> 1.2
> > +---
> > +$id: http://devicetree.org/schemas/dma/snps,dw-axi-dmac.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Synopsys DesignWare AXI DMA Controller
> > +
> > +maintainers:
> > + - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com
> > +
> > +description: |
> Don't need '|' unless there's formatting to preserve.
>
> > + Synopsys DesignWare AXI DMA Controller DT Binding
>
> And should be 2 space indent.
>
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - snps,axi-dma-1.01a
> > +
> > + reg:
> > + items:
> > + - description: Address range of the DMAC registers
>
> Just 'maxItems: 1'
>
> > +
> > + reg-names:
> > + items:
> > + - const: axidma_ctrl_regs
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: Bus Clock
> > + - description: Module Clock
> > +
> > + clock-names:
> > + items:
> > + - const: core-clk
> > + - const: cfgr-clk
> > +
> > + '#dma-cells':
> > + const: 1
> > +
> > + dma-channels:
> > + description: |
> > + Number of channels supported by hardware.
>
> No need to describe a common property. You do need to provide
> some constraints. I'd assume there's less than 2^32 channels.
>
> > +
> > + snps,dma-masters:
> > + description: |
> > + Number of AXI masters supported by the hardware.
> > + allOf:
>
> You don't need to use allOf with a $ref anymore.
>
> > + - $ref: /schemas/types.yaml#/definitions/uint32
> > + - enum: [1, 2]
> > + default: 2
> > +
> > + snps,data-width:
> > + description: |
> > + AXI data width supported by hardware.
> > + (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
> > + allOf:
> > + - $ref: /schemas/types.yaml#/definitions/uint32
> > + - enum: [0, 1, 2, 3, 4, 5, 6]
> > + default: 4
> > +
> > + snps,priority:
> > + description: |
> > + Channel priority specifier associated with the DMA channels.
> > + allOf:
> > + - $ref: /schemas/types.yaml#/definitions/uint32-array
> > + - minItems: 1
> > + maxItems: 8
> > + default: [0, 1, 2, 3]
> > +
> > + snps,block-size:
> > + description: |
> > + Channel block size specifier associated with the DMA channels.
> > + allOf:
> > + - $ref: /schemas/types.yaml#/definitions/uint32-array
> > + - minItems: 1
> > + maxItems: 8
> > + default: [4096, 4096, 4096, 4096]
> > +
> > + snps,axi-max-burst-len:
> > + description: |
> > + Restrict master AXI burst length by value specified in this
> property.
> > + If this property is missing the maximum AXI burst length
> supported by
> > + DMAC is used. [1:256]
>
> Looks like some constraints.
>
> > + allOf:
> > + - $ref: /schemas/types.yaml#/definitions/uint32
> > + default: 16
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - clock-names
> > + - interrupts
> > + - '#dma-cells'
> > + - dma-channels
> > + - snps,dma-masters
> > + - snps,data-width
> > + - snps,priority
> > + - snps,block-size
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + /* example with snps,dw-axi-dmac */
> > + dmac: dma-controller@80000 {
> > + compatible = "snps,axi-dma-1.01a";
> > + reg = <0x80000 0x400>;
> > + clocks = <&core_clk>, <&cfgr_clk>;
> > + clock-names = "core-clk", "cfgr-clk";
> > + interrupt-parent = <&intc>;
> > + interrupts = <27>;
> > + #dma-cells = <1>;
> > + dma-channels = <4>;
> > + snps,dma-masters = <2>;
> > + snps,data-width = <3>;
> > + snps,block-size = <4096 4096 4096 4096>;
> > + snps,priority = <0 1 2 3>;
> > + snps,axi-max-burst-len = <16>;
> > + };
> > --
> > 2.18.0
> >

\
 
 \ /
  Last update: 2020-12-09 04:23    [W:0.085 / U:2.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site