lkml.org 
[lkml]   [2020]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] s390/mm: Define arch_get_mappable_range()
From
Date


On 12/8/20 8:57 PM, Heiko Carstens wrote:
> On Tue, Dec 08, 2020 at 09:46:18AM +0530, Anshuman Khandual wrote:
>> This overrides arch_get_mappabble_range() on s390 platform which will be
>> used with recently added generic framework. It drops a redundant similar
>> check in vmem_add_mapping() while compensating __segment_load() with a new
>> address range check to preserve the existing functionality. It also adds a
>> VM_BUG_ON() check that would ensure that memhp_range_allowed() has already
>> been called on the hotplug path.
>>
>> Cc: Heiko Carstens <hca@linux.ibm.com>
>> Cc: Vasily Gorbik <gor@linux.ibm.com>
>> Cc: David Hildenbrand <david@redhat.com>
>> Cc: linux-s390@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
>> ---
>> arch/s390/mm/extmem.c | 5 +++++
>> arch/s390/mm/init.c | 10 ++++++++++
>> arch/s390/mm/vmem.c | 4 ----
>> 3 files changed, 15 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
>> index 5060956b8e7d..cc055a78f7b6 100644
>> --- a/arch/s390/mm/extmem.c
>> +++ b/arch/s390/mm/extmem.c
>> @@ -337,6 +337,11 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
>> goto out_free_resource;
>> }
>>
>> + if (seg->end + 1 > VMEM_MAX_PHYS || seg->end + 1 < seg->start_addr) {
>> + rc = -ERANGE;
>> + goto out_resource;
>> + }
>> +
>> rc = vmem_add_mapping(seg->start_addr, seg->end - seg->start_addr + 1);
>> if (rc)
>> goto out_resource;
>> diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
>> index 77767850d0d0..64937baabf93 100644
>> --- a/arch/s390/mm/init.c
>> +++ b/arch/s390/mm/init.c
>> @@ -278,6 +278,15 @@ device_initcall(s390_cma_mem_init);
>>
>> #endif /* CONFIG_CMA */
>>
>> +struct range arch_get_mappable_range(void)
>> +{
>> + struct range memhp_range;
>> +
>> + memhp_range.start = 0;
>> + memhp_range.end = VMEM_MAX_PHYS;
>> + return memhp_range;
>> +}
>> +
>> int arch_add_memory(int nid, u64 start, u64 size,
>> struct mhp_params *params)
>> {
>> @@ -291,6 +300,7 @@ int arch_add_memory(int nid, u64 start, u64 size,
>> if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot))
>> return -EINVAL;
>>
>> + VM_BUG_ON(!memhp_range_allowed(start, size, 1));
>> rc = vmem_add_mapping(start, size);
>> if (rc)
>> return rc;
>> diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
>> index b239f2ba93b0..749eab43aa93 100644
>> --- a/arch/s390/mm/vmem.c
>> +++ b/arch/s390/mm/vmem.c
>> @@ -536,10 +536,6 @@ int vmem_add_mapping(unsigned long start, unsigned long size)
>> {
>> int ret;
>>
>> - if (start + size > VMEM_MAX_PHYS ||
>> - start + size < start)
>> - return -ERANGE;
>> -
>
> Is there a reason why you added the memhp_range_allowed() check call
> to arch_add_memory() instead of vmem_add_mapping()? If you would do

As I had mentioned previously, memhp_range_allowed() is available with
CONFIG_MEMORY_HOTPLUG but vmem_add_mapping() is always available. Hence
there will be a build failure in vmem_add_mapping() for the range check
memhp_range_allowed() without memory hotplug enabled.

> that, then the extra code in __segment_load() wouldn't be
> required.
> Even though the error message from memhp_range_allowed() might be
> highly confusing.
Alternatively leaving __segment_load() and vmem_add_memory() unchanged
will create three range checks i.e two memhp_range_allowed() and the
existing VMEM_MAX_PHYS check in vmem_add_mapping() on all the hotplug
paths, which is not optimal.

\
 
 \ /
  Last update: 2020-12-09 03:39    [W:0.084 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site