lkml.org 
[lkml]   [2020]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [RFC PATCH 09/14] cxl/mem: Add basic IOCTL interface
On Tue, Dec 8, 2020 at 4:24 PM Ben Widawsky <ben.widawsky@intel.com> wrote:
>
> Add a straightforward IOCTL that provides a mechanism for userspace to
> query the supported memory device commands.
>
> Memory device commands are specified in 8.2.9 of the CXL 2.0
> specification. They are submitted through a mailbox mechanism specified
> in 8.2.8.4.
>
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
>
> ---
>
> I did attempt to use the same struct for querying commands as well as
> sending commands (upcoming patch). The number of unused fields between
> the two made for a bad fit IMO.
>
> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> ---
> Documentation/cxl/memory-devices.rst | 9 +++
> drivers/cxl/mem.c | 89 +++++++++++++++++++++++
> include/uapi/linux/cxl_mem.h | 102 +++++++++++++++++++++++++++
> 3 files changed, 200 insertions(+)
> create mode 100644 include/uapi/linux/cxl_mem.h
>
> diff --git a/Documentation/cxl/memory-devices.rst b/Documentation/cxl/memory-devices.rst
> index 5f723c25382b..ec54674b3822 100644
> --- a/Documentation/cxl/memory-devices.rst
> +++ b/Documentation/cxl/memory-devices.rst
> @@ -32,6 +32,15 @@ CXL Memory Device
> .. kernel-doc:: drivers/cxl/mem.c
> :internal:
>
> +CXL IOCTL Interface
> +-------------------
> +
> +.. kernel-doc:: include/uapi/linux/cxl_mem.h
> + :doc: UAPI
> +
> +.. kernel-doc:: include/uapi/linux/cxl_mem.h
> + :internal:
> +
> External Interfaces
> ===================
>
> diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
> index bb6ea58f6c7b..2c4aadcea0e4 100644
> --- a/drivers/cxl/mem.c
> +++ b/drivers/cxl/mem.c
> @@ -7,6 +7,7 @@
> #include <linux/idr.h>
> #include <linux/pci.h>
> #include <linux/io.h>
> +#include <uapi/linux/cxl_mem.h>
> #include "acpi.h"
> #include "pci.h"
> #include "cxl.h"
> @@ -73,6 +74,49 @@ static DEFINE_IDR(cxl_mem_idr);
> /* protect cxl_mem_idr allocations */
> static DEFINE_MUTEX(cxl_memdev_lock);
>
> +/*
> + * This table defines the supported mailboxes commands for the driver. The id is
> + * ordinal and thus gaps in this table aren't allowed. This table is made up of
> + * a UAPI structure. Non-negative values in the table will be validated against
> + * the user's input. For example, if size_in is 0, and the user passed in 1, it
> + * is an error.
> + */
> +#define CXL_CMD(_id, _flags, sin, sout, _name, _enable, op) \
> + { \
> + { .id = CXL_MEM_COMMAND_ID_##_id, \
> + .flags = CXL_MEM_COMMAND_FLAG_##_flags, \
> + .size_in = sin, \
> + .size_out = sout, \
> + .name = _name }, \
> + .enable = _enable, .opcode = op \
> + }

Seems the ordinality requirement could be dropped if the definition was:

#define CXL_CMD(_id, _flags, sin, sout, _name, _enable, op) \
[CXL_MEM_COMMAND_ID_##_id] = {
\
{ .id = CXL_MEM_COMMAND_ID_##_id, \
...

Then command 0 and 42 could be defined out of order in the table.
Especially if we need to config-disable or deprecate commands, I think
it would be useful if this table was tolerant to being sparse.

> +
> +/**
> + * struct cxl_mem_command - Driver representation of a memory device command
> + * @info: Command information as it exists for the UAPI
> + * @opcode: The actual bits used for the mailbox protocol
> + * @enable: Whether the command is enabled. The driver may support a large set
> + * of commands that may not be enabled. The primary reason a command
> + * would not be enabled is for commands that are specified as optional
> + * and the hardware doesn't support the command.
> + *
> + * The cxl_mem_command is the driver's internal representation of commands that
> + * are supported by the driver. Some of these commands may not be supported by
> + * the hardware (!@enable). The driver will use @info to validate the fields
> + * passed in by the user then submit the @opcode to the hardware.
> + *
> + * See struct cxl_command_info.
> + */
> +struct cxl_mem_command {
> + const struct cxl_command_info info;
> + const u16 opcode;
> + bool enable;
> +};
> +
> +static struct cxl_mem_command mem_commands[] = {
> + CXL_CMD(INVALID, NONE, 0, 0, "Reserved", false, 0),
> +};
> +
> static int cxl_mem_wait_for_doorbell(struct cxl_mem *cxlm)
> {
> const int timeout = msecs_to_jiffies(2000);
> @@ -268,8 +312,53 @@ static int cxl_mem_open(struct inode *inode, struct file *file)
> return 0;
> }
>
> +static int cxl_mem_count_commands(void)
> +{
> + int i, n = 0;
> +
> + for (i = 0; i < ARRAY_SIZE(mem_commands); i++) {
> + struct cxl_mem_command *c = &mem_commands[i];
> +
> + if (c->enable)
> + n++;
> + }
> +
> + return n;
> +}
> +
> static long cxl_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> {
> + if (cmd == CXL_MEM_QUERY_COMMANDS) {
> + struct cxl_mem_query_commands __user *q = (void __user *)arg;
> + u32 n_commands;
> + int i, j;
> +
> + if (get_user(n_commands, (u32 __user *)arg))
> + return -EFAULT;
> +
> + if (n_commands == 0)
> + return put_user(cxl_mem_count_commands(),
> + (u32 __user *)arg);
> +
> + for (i = 0, j = 0;
> + i < ARRAY_SIZE(mem_commands) && j < n_commands; i++) {
> + struct cxl_mem_command *c = &mem_commands[i];
> + const struct cxl_command_info *info = &c->info;
> +
> + if (!c->enable)
> + continue;
> +
> + if (copy_to_user(&q->commands[j], info, sizeof(*info)))
> + return -EFAULT;
> +
> + if (copy_to_user(&q->commands[j].name, info->name,
> + strlen(info->name)))
> + return -EFAULT;

Not sure why this is needed, see comment below about @name in
cxl_mem_query_commands.

> +
> + j++;
> + }
> + }
> +
> return -ENOTTY;
> }
>
> diff --git a/include/uapi/linux/cxl_mem.h b/include/uapi/linux/cxl_mem.h
> new file mode 100644
> index 000000000000..1d1e143f98ec
> --- /dev/null
> +++ b/include/uapi/linux/cxl_mem.h
> @@ -0,0 +1,102 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +/*
> + * CXL IOCTLs for Memory Devices
> + */
> +
> +#ifndef _UAPI_CXL_MEM_H_
> +#define _UAPI_CXL_MEM_H_
> +
> +#if defined(__cplusplus)
> +extern "C" {
> +#endif
> +
> +/**
> + * DOC: UAPI
> + *
> + * CXL memory devices expose UAPI to have a standard user interface.
> + * Userspace can refer to these structure definitions and UAPI formats
> + * to communicate to driver
> + */
> +
> +#define CXL_MEM_QUERY_COMMANDS _IOR('C', 1, struct cxl_mem_query_commands)
> +
> +#define CXL_MEM_COMMAND_NAME_LENGTH 32
> +
> +/**
> + * struct cxl_command_info - Command information returned from a query.
> + * @id: ID number for the command.
> + * @flags: Flags that specify command behavior.
> + *
> + * - CXL_MEM_COMMAND_FLAG_TAINT: Using this command will taint the kernel.
> + * @size_in: Expected input size, or -1 if variable length.
> + * @size_out: Expected output size, or -1 if variable length.
> + * @name: Name describing the command.
> + *
> + * Represents a single command that is supported by both the driver and the
> + * hardware. The is returned as part of an array from the query ioctl. The
> + * following would be a command named "foobar" that takes a variable length
> + * input and returns 0 bytes of output.
> + *
> + * - @id = 10
> + * - @name = foobar
> + * - @flags = 0
> + * - @size_in = -1
> + * - @size_out = 0
> + *
> + * See struct cxl_mem_query_commands.
> + */
> +struct cxl_command_info {
> + __u32 id;
> +#define CXL_MEM_COMMAND_ID_INVALID 0
> +
> + __u32 flags;
> +#define CXL_MEM_COMMAND_FLAG_NONE 0
> +#define CXL_MEM_COMMAND_FLAG_TAINT BIT(0)
> +
> + __s32 size_in;
> + __s32 size_out;
> +
> + char name[32];
Why does the name for a command need to be shuffled back and forth
over the ioctl interface. Can't this be handled by a static lookup
table defined in the header?

> +};
> +
> +/**
> + * struct cxl_mem_query_commands - Query supported commands.
> + * @n_commands: In/out parameter. When @n_commands is > 0, the driver will
> + * return min(num_support_commands, n_commands). When @n_commands
> + * is 0, driver will return the number of total supported commands.
> + * @rsvd: Reserved for future use.
> + * @commands: Output array of supported commands. This array must be allocated
> + * by userspace to be at least min(num_support_commands, @n_commands)
> + *
> + * Allow userspace to query the available commands supported by both the driver,
> + * and the hardware. Commands that aren't supported by either the driver, or the
> + * hardware are not returned in the query.
> + *
> + * Examples:
> + *
> + * - { .n_commands = 0 } // Get number of supported commands
> + * - { .n_commands = 15, .commands = buf } // Return first 15 (or less)
> + * supported commands
> + *
> + * See struct cxl_command_info.
> + */
> +struct cxl_mem_query_commands {
> + /*
> + * Input: Number of commands to return (space allocated by user)
> + * Output: Number of commands supported by the driver/hardware
> + *
> + * If n_commands is 0, kernel will only return number of commands and
> + * not try to populate commands[], thus allowing userspace to know how
> + * much space to allocate
> + */
> + __u32 n_commands;
> + __u32 rsvd;
> +
> + struct cxl_command_info __user commands[]; /* out: supported commands */
> +};
> +
> +#if defined(__cplusplus)
> +}
> +#endif
> +
> +#endif
> --
> 2.29.2
>

\
 
 \ /
  Last update: 2020-12-09 02:40    [W:0.428 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site