Messages in this thread | | | Date | Tue, 8 Dec 2020 00:24:35 +0100 | From | Clemens Gruber <> | Subject | Re: [PATCH v4 1/4] pwm: pca9685: Switch to atomic API |
| |
On Mon, Dec 07, 2020 at 05:34:58PM -0500, Sven Van Asbroeck wrote: > Hi Uwe, > > On Mon, Dec 7, 2020 at 5:00 PM Uwe Kleine-König > <u.kleine-koenig@pengutronix.de> wrote: > > > > This is not acceptable, if you have two PWM outputs and a consumer > > modifies one of them the other must change. So if this chip only > > supports a single period length of all channels, the first consumer > > enabling a channel defines the period to be used. All later consumers > > must live with that. (Also the first must be denied modifying the period > > if a second consumer has enabled its PWM.) > > That makes sense. However, a possible wrinkle: when more than one pwm channel > is requested, which one is able to change the period? > > Example: > 1. start with all pwms free > 2. pwm_request(0), pwm_apply(period=200Hz) > 3. pwm_request(1) > 4. pwm_apply(1, period=400Hz) fails? > 5. pwm_apply(0, period=400Hz) succeeds? > > And if (5) succeeds, then pwm_get_state(1) will still return period=200Hz, > because the pwm core doesn't realize anything has changed. Are you ok > with this behaviour?
I think we'd have to deny the pwm_apply in step 5 as well. So, only the first consumer is allowed to change the period and only as long as it is the only one that is in use / was requested.
But that's definitely a breaking change.
Thanks, Clemens
| |