lkml.org 
[lkml]   [2020]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] net: dsa: lantiq: allow to use all GPHYs on xRX300 and xRX330
Date
From: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>

This patch allows you to use all phs on GRX300 and GRX330. The ARX300 has 3
and the GRX330 has 4 integrated PHYs connected to different ports compared
to VRX200.

Port configurations:

xRX200:
GMAC0: RGMII port
GMAC1: RGMII port
GMAC2: GPHY0 (GMII)
GMAC3: GPHY0 (MII)
GMAC4: GPHY1 (GMII)
GMAC5: GPHY1 (MII) or RGMII port

xRX300:
GMAC0: RGMII port
GMAC1: GPHY2 (GMII)
GMAC2: GPHY0 (GMII)
GMAC3: GPHY0 (MII)
GMAC4: GPHY1 (GMII)
GMAC5: GPHY1 (MII) or RGMII port

xRX330:
GMAC0: RGMII port
GMAC1: GPHY2 (GMII)
GMAC2: GPHY0 (GMII)
GMAC3: GPHY3 (GMII)
GMAC4: GPHY1 (GMII)
GMAC5: GPHY1 (MII) or RGMII port

Tested on D-Link DWR966 with OpenWRT.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
drivers/net/dsa/lantiq_gswip.c | 110 +++++++++++++++++++++++++++++++--
1 file changed, 104 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 09701c17f3f6..540cf99ad7fe 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -222,6 +222,7 @@
struct gswip_hw_info {
int max_ports;
int cpu_port;
+ struct dsa_switch_ops *ops;
};

struct xway_gphy_match_data {
@@ -1409,9 +1410,9 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
return 0;
}

-static void gswip_phylink_validate(struct dsa_switch *ds, int port,
- unsigned long *supported,
- struct phylink_link_state *state)
+static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };

@@ -1471,7 +1472,70 @@ static void gswip_phylink_validate(struct dsa_switch *ds, int port,
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
phy_modes(state->interface), port);
+}
+
+static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+ switch (port) {
+ case 0:
+ if (!phy_interface_mode_is_rgmii(state->interface) &&
+ state->interface != PHY_INTERFACE_MODE_MII &&
+ state->interface != PHY_INTERFACE_MODE_REVMII &&
+ state->interface != PHY_INTERFACE_MODE_RMII)
+ goto unsupported;
+ break;
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
+ goto unsupported;
+ break;
+ case 5:
+ if (!phy_interface_mode_is_rgmii(state->interface) &&
+ state->interface != PHY_INTERFACE_MODE_INTERNAL)
+ goto unsupported;
+ break;
+ default:
+ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ dev_err(ds->dev, "Unsupported port: %i\n", port);
+ return;
+ }
+
+ /* Allow all the expected bits */
+ phylink_set(mask, Autoneg);
+ phylink_set_port_modes(mask);
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
+
+ /* With the exclusion of MII and Reverse MII, we support Gigabit,
+ * including Half duplex
+ */
+ if (state->interface != PHY_INTERFACE_MODE_MII &&
+ state->interface != PHY_INTERFACE_MODE_REVMII) {
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseT_Half);
+ }
+
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+
+ bitmap_and(supported, supported, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ bitmap_and(state->advertising, state->advertising, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
return;
+
+unsupported:
+ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
+ phy_modes(state->interface), port);
}

static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
@@ -1614,7 +1678,7 @@ static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset)
return ARRAY_SIZE(gswip_rmon_cnt);
}

-static const struct dsa_switch_ops gswip_switch_ops = {
+static const struct dsa_switch_ops gswip_xrx200_switch_ops = {
.get_tag_protocol = gswip_get_tag_protocol,
.setup = gswip_setup,
.port_enable = gswip_port_enable,
@@ -1630,7 +1694,32 @@ static const struct dsa_switch_ops gswip_switch_ops = {
.port_fdb_add = gswip_port_fdb_add,
.port_fdb_del = gswip_port_fdb_del,
.port_fdb_dump = gswip_port_fdb_dump,
- .phylink_validate = gswip_phylink_validate,
+ .phylink_validate = gswip_xrx200_phylink_validate,
+ .phylink_mac_config = gswip_phylink_mac_config,
+ .phylink_mac_link_down = gswip_phylink_mac_link_down,
+ .phylink_mac_link_up = gswip_phylink_mac_link_up,
+ .get_strings = gswip_get_strings,
+ .get_ethtool_stats = gswip_get_ethtool_stats,
+ .get_sset_count = gswip_get_sset_count,
+};
+
+static const struct dsa_switch_ops gswip_xrx300_switch_ops = {
+ .get_tag_protocol = gswip_get_tag_protocol,
+ .setup = gswip_setup,
+ .port_enable = gswip_port_enable,
+ .port_disable = gswip_port_disable,
+ .port_bridge_join = gswip_port_bridge_join,
+ .port_bridge_leave = gswip_port_bridge_leave,
+ .port_fast_age = gswip_port_fast_age,
+ .port_vlan_filtering = gswip_port_vlan_filtering,
+ .port_vlan_prepare = gswip_port_vlan_prepare,
+ .port_vlan_add = gswip_port_vlan_add,
+ .port_vlan_del = gswip_port_vlan_del,
+ .port_stp_state_set = gswip_port_stp_state_set,
+ .port_fdb_add = gswip_port_fdb_add,
+ .port_fdb_del = gswip_port_fdb_del,
+ .port_fdb_dump = gswip_port_fdb_dump,
+ .phylink_validate = gswip_xrx300_phylink_validate,
.phylink_mac_config = gswip_phylink_mac_config,
.phylink_mac_link_down = gswip_phylink_mac_link_down,
.phylink_mac_link_up = gswip_phylink_mac_link_up,
@@ -1892,7 +1981,7 @@ static int gswip_probe(struct platform_device *pdev)
priv->ds->dev = dev;
priv->ds->num_ports = priv->hw_info->max_ports;
priv->ds->priv = priv;
- priv->ds->ops = &gswip_switch_ops;
+ priv->ds->ops = priv->hw_info->ops;
priv->dev = dev;
version = gswip_switch_r(priv, GSWIP_VERSION);

@@ -1973,10 +2062,19 @@ static int gswip_remove(struct platform_device *pdev)
static const struct gswip_hw_info gswip_xrx200 = {
.max_ports = 7,
.cpu_port = 6,
+ .ops = &gswip_xrx200_switch_ops,
+};
+
+static const struct gswip_hw_info gswip_xrx300 = {
+ .max_ports = 7,
+ .cpu_port = 6,
+ .ops = &gswip_xrx300_switch_ops,
};

static const struct of_device_id gswip_of_match[] = {
{ .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 },
+ { .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 },
+ { .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 },
{},
};
MODULE_DEVICE_TABLE(of, gswip_of_match);
--
2.20.1
\
 
 \ /
  Last update: 2020-12-03 23:13    [W:0.063 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site