lkml.org 
[lkml]   [2020]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 035/242] pinctrl: merrifield: Set default bias in case no particular value given
Date
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 0fa86fc2e28227f1e64f13867e73cf864c6d25ad ]

When GPIO library asks pin control to set the bias, it doesn't pass
any value of it and argument is considered boolean (and this is true
for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual
drivers must behave well, when they got the resistance value of 1 Ohm,
i.e. transforming it to sane default.

In case of Intel Merrifield pin control hardware the 20 kOhm sounds plausible
because it gives a good trade off between weakness and minimization of leakage
current (will be only 50 uA with the above choice).

Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support")
Depends-on: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/intel/pinctrl-merrifield.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c
index 86c4b3fab7b0e..5aa6d1dbc70ae 100644
--- a/drivers/pinctrl/intel/pinctrl-merrifield.c
+++ b/drivers/pinctrl/intel/pinctrl-merrifield.c
@@ -731,6 +731,10 @@ static int mrfld_config_set_pin(struct mrfld_pinctrl *mp, unsigned int pin,
mask |= BUFCFG_Px_EN_MASK | BUFCFG_PUPD_VAL_MASK;
bits |= BUFCFG_PU_EN;

+ /* Set default strength value in case none is given */
+ if (arg == 1)
+ arg = 20000;
+
switch (arg) {
case 50000:
bits |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT;
@@ -751,6 +755,10 @@ static int mrfld_config_set_pin(struct mrfld_pinctrl *mp, unsigned int pin,
mask |= BUFCFG_Px_EN_MASK | BUFCFG_PUPD_VAL_MASK;
bits |= BUFCFG_PD_EN;

+ /* Set default strength value in case none is given */
+ if (arg == 1)
+ arg = 20000;
+
switch (arg) {
case 50000:
bits |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT;
--
2.27.0


\
 
 \ /
  Last update: 2020-12-28 14:11    [W:2.203 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site