lkml.org 
[lkml]   [2020]   [Dec]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/3] drivers/soc/litex: move generic accessors to litex.h
Date
Move generic LiteX CSR (MMIO) register accessors to litex.h and
declare them as "static inline", in preparation for supporting
32-bit CSR subregisters and 64-bit CPUs.

NOTE: this is a non-functional change.

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
---
drivers/soc/litex/litex_soc_ctrl.c | 73 -----------------------------
include/linux/litex.h | 74 ++++++++++++++++++++++++++++--
2 files changed, 69 insertions(+), 78 deletions(-)

diff --git a/drivers/soc/litex/litex_soc_ctrl.c b/drivers/soc/litex/litex_soc_ctrl.c
index 1217cafdfd4d..65977526d68e 100644
--- a/drivers/soc/litex/litex_soc_ctrl.c
+++ b/drivers/soc/litex/litex_soc_ctrl.c
@@ -16,79 +16,6 @@
#include <linux/errno.h>
#include <linux/io.h>

-/*
- * LiteX SoC Generator, depending on the configuration, can split a single
- * logical CSR (Control&Status Register) into a series of consecutive physical
- * registers.
- *
- * For example, in the configuration with 8-bit CSR Bus, 32-bit aligned (the
- * default one for 32-bit CPUs) a 32-bit logical CSR will be generated as four
- * 32-bit physical registers, each one containing one byte of meaningful data.
- *
- * For details see: https://github.com/enjoy-digital/litex/wiki/CSR-Bus
- *
- * The purpose of `litex_set_reg`/`litex_get_reg` is to implement the logic
- * of writing to/reading from the LiteX CSR in a single place that can be
- * then reused by all LiteX drivers.
- */
-
-/**
- * litex_set_reg() - Writes the value to the LiteX CSR (Control&Status Register)
- * @reg: Address of the CSR
- * @reg_size: The width of the CSR expressed in the number of bytes
- * @val: Value to be written to the CSR
- *
- * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
- * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
- * each one containing one byte of meaningful data.
- *
- * This function splits a single possibly multi-byte write into a series of
- * single-byte writes with a proper offset.
- */
-void litex_set_reg(void __iomem *reg, unsigned long reg_size,
- unsigned long val)
-{
- unsigned long shifted_data, shift, i;
-
- for (i = 0; i < reg_size; ++i) {
- shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
- shifted_data = val >> shift;
-
- WRITE_LITEX_SUBREGISTER(shifted_data, reg, i);
- }
-}
-EXPORT_SYMBOL_GPL(litex_set_reg);
-
-/**
- * litex_get_reg() - Reads the value of the LiteX CSR (Control&Status Register)
- * @reg: Address of the CSR
- * @reg_size: The width of the CSR expressed in the number of bytes
- *
- * Return: Value read from the CSR
- *
- * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
- * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
- * each one containing one byte of meaningful data.
- *
- * This function generates a series of single-byte reads with a proper offset
- * and joins their results into a single multi-byte value.
- */
-unsigned long litex_get_reg(void __iomem *reg, unsigned long reg_size)
-{
- unsigned long shifted_data, shift, i;
- unsigned long result = 0;
-
- for (i = 0; i < reg_size; ++i) {
- shifted_data = READ_LITEX_SUBREGISTER(reg, i);
-
- shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
- result |= (shifted_data << shift);
- }
-
- return result;
-}
-EXPORT_SYMBOL_GPL(litex_get_reg);
-
#define SCRATCH_REG_OFF 0x04
#define SCRATCH_REG_VALUE 0x12345678
#define SCRATCH_TEST_VALUE 0xdeadbeef
diff --git a/include/linux/litex.h b/include/linux/litex.h
index 40f5be503593..67c1a18a7425 100644
--- a/include/linux/litex.h
+++ b/include/linux/litex.h
@@ -3,9 +3,6 @@
* Common LiteX header providing
* helper functions for accessing CSRs.
*
- * Implementation of the functions is provided by
- * the LiteX SoC Controller driver.
- *
* Copyright (C) 2019-2020 Antmicro <www.antmicro.com>
*/

@@ -33,9 +30,76 @@
#define READ_LITEX_SUBREGISTER(base_offset, subreg_id) \
le32_to_cpu((__le32 __force)readl(base_offset + (LITEX_REG_SIZE * subreg_id)))

-void litex_set_reg(void __iomem *reg, unsigned long reg_sz, unsigned long val);
+/*
+ * LiteX SoC Generator, depending on the configuration, can split a single
+ * logical CSR (Control&Status Register) into a series of consecutive physical
+ * registers.
+ *
+ * For example, in the configuration with 8-bit CSR Bus, 32-bit aligned (the
+ * default one for 32-bit CPUs) a 32-bit logical CSR will be generated as four
+ * 32-bit physical registers, each one containing one byte of meaningful data.
+ *
+ * For details see: https://github.com/enjoy-digital/litex/wiki/CSR-Bus
+ *
+ * The purpose of `litex_set_reg`/`litex_get_reg` is to implement the logic
+ * of writing to/reading from the LiteX CSR in a single place that can be
+ * then reused by all LiteX drivers.
+ */
+
+/**
+ * litex_set_reg() - Writes the value to the LiteX CSR (Control&Status Register)
+ * @reg: Address of the CSR
+ * @reg_size: The width of the CSR expressed in the number of bytes
+ * @val: Value to be written to the CSR
+ *
+ * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
+ * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
+ * each one containing one byte of meaningful data.
+ *
+ * This function splits a single possibly multi-byte write into a series of
+ * single-byte writes with a proper offset.
+ */
+static inline void litex_set_reg(void __iomem *reg, ulong reg_size, ulong val)
+{
+ ulong shifted_data, shift, i;
+
+ for (i = 0; i < reg_size; ++i) {
+ shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
+ shifted_data = val >> shift;
+
+ WRITE_LITEX_SUBREGISTER(shifted_data, reg, i);
+ }
+}
+
+/**
+ * litex_get_reg() - Reads the value of the LiteX CSR (Control&Status Register)
+ * @reg: Address of the CSR
+ * @reg_size: The width of the CSR expressed in the number of bytes
+ *
+ * Return: Value read from the CSR
+ *
+ * In the currently supported LiteX configuration (8-bit CSR Bus, 32-bit aligned),
+ * a 32-bit LiteX CSR is generated as 4 consecutive 32-bit physical registers,
+ * each one containing one byte of meaningful data.
+ *
+ * This function generates a series of single-byte reads with a proper offset
+ * and joins their results into a single multi-byte value.
+ */
+static inline ulong litex_get_reg(void __iomem *reg, ulong reg_size)
+{
+ ulong shifted_data, shift, i;
+ ulong result = 0;
+
+ for (i = 0; i < reg_size; ++i) {
+ shifted_data = READ_LITEX_SUBREGISTER(reg, i);
+
+ shift = ((reg_size - i - 1) * LITEX_SUBREG_SIZE_BIT);
+ result |= (shifted_data << shift);
+ }
+
+ return result;
+}

-unsigned long litex_get_reg(void __iomem *reg, unsigned long reg_sz);

static inline void litex_write8(void __iomem *reg, u8 val)
{
--
2.26.2
\
 
 \ /
  Last update: 2020-12-25 15:23    [W:0.061 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site