lkml.org 
[lkml]   [2020]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/2] dt-bindings: arm: Add optional interrupt to smc/hvc SCMI transport
Date
In normal use of smc/hvc transport in SCMI the message completion is
indicated by the return of the SMC call. This commit provides for an
optional interrupt named "a2p" which is used instead to
indicate the completion of a message.

Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
---
Documentation/devicetree/bindings/arm/arm,scmi.txt | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt
index b5ce5b39bb9c..667d58e0a659 100644
--- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt
@@ -31,6 +31,14 @@ Optional properties:

- mbox-names: shall be "tx" or "rx" depending on mboxes entries.

+- interrupts : when using smc or hvc transports, this optional
+ property indicates that msg completion by the platform is indicated
+ by an interrupt rather than by the return of the smc call. This
+ should not be used except when the platform requires such behavior.
+
+- interrupt-names : if "interrupts" is present, interrupt-names must also
+ be present and have the value "a2p".
+
See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details
about the generic mailbox controller and client driver bindings.

--
2.17.1
\
 
 \ /
  Last update: 2020-12-22 15:59    [W:0.098 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site